SciELO - Scientific Electronic Library Online

 
vol.61 número1DEVELOPMENT OF AN ANALYTICAL METHOD FOR THE MAIN ORGANIC COMPOUNDS DERIVED FROM THERMOCHEMICAL CONVERSION OF BIOMASSSENSITIVE SIMULTANEOUS DETERMINATION OF PARACETAMOL AND DICLOFENAC BASED ON Au NANOPARTICLES - FUNCTIONALIZED GRAPHENE/POLY (L-ARGININE) GLASSY CARBON ELECTRODE índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Journal of the Chilean Chemical Society

versión On-line ISSN 0717-9707

J. Chil. Chem. Soc. vol.61 no.1 Concepción mar. 2016

http://dx.doi.org/10.4067/S0717-97072016000100018 

 

RECYCLABLE ACIDIC BR0NSTED IONIC LIQUID CATALYZED SYNTHESIS OF QUINOXALINE

 

TEJESWARARAO D*a

a Indian Institute of Chemical Technolgy, Fine Chemical Laboratory, Tarnaka, Hyderabad, India.

e-mail: teja.iict@gmail.com


ABSTRACT

The acidic ionic liquid, 1-(4-sulfonic acid) butyl-3-methylimidazolium hydrogen sulfate [MimC4SO3H]HSO4 catalyzed two-component condensation reaction of phenacyl bromide and o-phenylenediamine to afford corresponding quinoxaline derivatives. The inexpensive and non-toxic ionic liquids can be reused severaltimes without any perceptible loss of their activities.

Keywords: Phenacyl bromide, Quinoxaline, Ionic liquids, Catalyst, Green chemistry.


 

INTRODUCTION

Quinoxalines, as a core structural motif, are everywhere in natural and unnatural compounds. In 20th century the biological applications of diversequinoxaline analogues has drawn the attention of many organic chemists.1"4Quinoxaline and its derivatives play an important role in medicinal chemistry and new drug discovery.5 In addition to that these are having many applications indyes preparation, chemically controllable switches, efficient electroluminescentmaterials, dehydroannulenes, and inorganic semiconductors.6"11 Quinoxalinering moiety comprise part of the chemical structures of various antibioticssuch as Echinomycin, Levomycin and Actinoleutin1213, that are known toinhibit growth of gram positive bacteria and are also active against varioustransplantable tumors.

In recent literature a number of methods have been reported for the synthesis of substituted quinoxalines: oxidation-trapping of a-hydroxy ketoneswith 1,2-diamines,14 1,4-addition of 1,2-diamines to diazenylbutenes,15cyclization-oxidation of phenacyl bromides and o-phenylenediamines throughsolid-phase synthesis16 and oxidative coupling of epoxides with ene-1,2-diamines.17 2,3-Disubstituted quinoxalines have also been prepared by Suzuki-Miyaura coupling reaction,18 condensation of o-phenylenediamines and1,2-dicarbonyl compounds in MeOH/AcOH under microwave irradiation19.Most of the methods that have been reported for the synthesis of quinoxalinesrequire elevated temperatures and complex catalysts. Hence, there is a needto develop a simple, eco-friendly method under mild conditions for the preparation of quinoxalines.

From last two decades ionic liquids have emerged as solvent and catalytic system in many organic transformations and preparation of inorganiccompounds2021, because of it’s low vapour pressure, high viscosity, highconductivity, thermal and oxidative stability, and inflammability. In addition tothat ionic liquids act as ideal medium in some specific reactions which involvereactive ionic intermediates. Furthermore, due to the stabilisation of chargedreactive intermediates by ionic liquids, can promote high selectivity and rate of reaction and are finding broad applications in synthetic organic chemistry.

Herein we report the use of ionic liquid (Fig. 1) as recyclable solvent for the oxidative condensation of phenacyl bromide and o-phenylenediamine toproduce quinoxaline derivatives in excellent yield at 65oC-75oC (Scheme 1).


1-(4-sulfonic acid) butyl-3-methylimidazolium hydrogen sulfate ([MimC4SO3H]HSO4)

Figure 1: Chemical structure of representative ionic liquid

Scheme 1

 

All the reactions proceeded smoothly in ionic liquid without any need of other catalyst. In these reactions ionic liquid plays a dual role as solventand catalyst. The reaction of 2-bromo-1-phenylethanone 1a with benzene-1,2-diamine 2a in 1-(4-sulfonic acid) butyl-3-methylimidazolium hydrogensulfate ([MimC4SO3H]HSO4) at 65-75oC over a period of 45min resultedin the formation of 2-phenylquinoxaline 3a in 95% yield. The product wasisolated by simple extraction with diethyl ether. The left over viscous ionicliquid was thoroughly washed with ether and recycled in subsequent reactions.Encouraged by the satisfactory results of our first attempts, we examined severalother phenacyl bromides. The scope and generality of this process is illustratedwith respect to various aryl diamines and phenacyl bromides, and the resultsare presented in Table 1. Better yields were obtained when phenacyl bromidehas electron donating substituents than electron withdrawing substituents, Inall the cases excellent yields were obtained. In similar manner 2-bromo-1-(6-chloropyridin-3-yl)ethanone condensed with various o-phenylenediaminederivatives to produce corresponding products (entries 12,13,14). 1-(4-sulfonicacid) butyl-3-methylimidazolium hydrogen sulfate [MimC4SO3H]HSO4 and allphenacyl bromide derivatives were prepared according to reported procedures.22This method is even effective with highly functionalized phenacyl bromides.For example, reaction of 2-bromo-1-(4-(3-fluoro-4-nitrophenoxy)phenyl)ethanone1i with o-phenylenediamine 2a under similar conditions to produce2-(4-(3-fluoro-4-nitrophenoxy)phenyl) quinoxaline 3o in good yield (Scheme2).

Scheme 2

aReaction conditions: Phenacyl bromide (1.0 mmol), o-phenylene diamine (1.1 mmol), [MimC4SO3H]HSO4 (5mol %). bIsolated yield.

It is very important to recycle ionic liquids in the context of economic feasibility. In view of the efficiency of the reaction in [MimC4SO3H]HSO4,we examined its recyclability. After separating the organic phase from the worked up reaction mixture, the left over [MimC4SO3H]HSO4 was reactivatedby drying under vacuum at 80-100oC for 20 min., and was reused for the samereaction without any perceptible loss of catalytic activity. These results areshown in Figure 2. The yield was only slightly decreased after the third cycle,indicating that the catalyst possessed an excellent reusability under the samereaction conditions. Apart from yield and recyclability, this process involvedsimple work-up procedure for isolation of the desired final product.


Table 1: Synthesis of quinoxalines in-(4-sulfonic acid) butyl-3-methylimidazolium hydrogen sulfate3


Figure 2: Graphical representation of obtained yields over four cycles

a-Halocarbonyl compounds show better reactivity in the presence of ionic liquids thereby reducing the reaction times, and improving the yields. The rateenhancement in an ionic liquid is probably due to increased polarization of the-CH2-Br bond in the polar ionic medium and also because of stabilization of the charged ionic intermediates by ionic liquid. In an ionic liquid , polarization of carbonyl compound is increased significantly compared to organic solvents.

The experimental procedure is very simple and convenient in addition to that, it does not require any aqueous work-up thereby avoiding the generationof toxic waste. Since the products were weakly soluble in the ionic liquid, theywere easily separated by simple extraction with ether. The rest of the viscousionic liquid was thoroughly washed with ether and recycled. The recoveredionic liquid was activated at 85oC under reduced pressure and reused withoutany significant loss of activity. By using recovered ionic liquid in the secondrun afforded similar yield to that obtained in the first run. However, in the third and fourth run, the yields were gradually decreased. For example, the reaction of 2-bromo-1-(p-tolyl)ethanone 1d and benzene-1,2-diamine 2a in[MimC4SO3H]HSÜ4 to produce 2-/>-tolylquinoxaline 3h gave 95, 93, 92, and 90% yields respectively over four cycles (Figure 1). The products obtainedwere of the same purity as in the first run. The simple experimental and productisolation procedures combined with ease of recovery and reuse of this novelreaction media is expected to contribute to the development of green strategiesfor the synthesis of quinoxalines.

In summary, this paper describes a convenient and efficient method for the synthesis of quinoxalines via the oxidative cyclization of highly reactivephenacyl bromides and o-phenylenediamine using ionic liquids as promoters.The simple experimental and product isolation procedures combined withease of recovery and reuse of this reaction media is expected to contributeto the development of environmentally friendly processes for the synthesis of quinoxalines of biological and medicinal importance. The use of ionic liquidsas promoters for this transformation avoids the use of moisture sensitive and heavy metal Lewis acids.

EXPERIMENTAL

SYNTHESIS AND CHARACTERIZATION OF (1-(4-SULFONIC ACID) BUTYL-3-METHYLIMIDAZOLIUM HYDROGEN SULFATE

1-Methylimidazole (15.8 ml, 0.2mol) and 1,4-butane sultone (22 ml,0.2mol) were charged into a 100 ml round-bottom flask. Then, the mixture was stirred at 40oC for 10h. The white solid zwitterion was washed repeatedlywith ether (80x5 ml) to remove non-ionic residues and dried in vacuum. Then,a stoichiometric amount of concentrated sulfuricacid (98%, 10.9 ml) wasadded by dropwise and the mixture stirred for 6 h at 80oC to form the IL.*H NMR (400 MHz, D2O): 5 = 1.28-1.32 (m, 2H, -CH2), 1.56-1.60 (m, 2H,-CH2X2.48-2.52 (t, J = 7.7 Hz, 2H, -CH2), 3.45 (s, 3H, -CH3), 3.78-3.82 (t, J =7.1 Hz, 2H, -CH2), 7.00 (s, 1H, imidazole), 7.05 (s, 1H, imidazole), 8.27 (s, 1H,imidazole);13C NMR (100 MHz, D2O): 5 = 20.75, 27.90 (-CH2), 35.63 (-CH3,imidazole), 48.75, 49.94 (-CH2), 121.90, 123.62 and 135.77 (-CH, imidazole).

General Procedure:

A mixture of phenacyl bromide (1 mmol) and o-phenylenediamine (1.2 mmol) in [MimC4SO3H]HSO4 (3 mL) was heated at 70oC for the appropriatetime (see Table 1). After completion of the reaction, as indicated by TLC, the reaction mixture was washed with diethylether (3x10mL). diluted with water(3 mlx10 ml). The combined ether extracts were concentrated in vacuo and the resulting product was directly charged onto a small silica gel column and elutedwith a mixture of ethyl acetate:n-hexane (0.5:9.5) to afford pure quinoxaline.The rest of the viscous ionic liquid was further washed with ether and recycledin subsequent runs. However, in the case of solids, the products were purifiedby recrystallization from appropriate solvents.

The spectral and analytical data of all compounds are given below.

(3a) 2-phenylquinoxaline:15 Milky white colour solid; mp 75-78oC; *H NMR (300 MHz, CDCl3) 5 (ppm) 7.61-7.40 (m, 3H, Ar-H), 7.82-7.66 (m, 2H,Ar-H), 8.16-8.06 (m, 2H, Ar-H), 8.25-8.17 (m, 2H, Ar-H), 9.31 (s, 1H, Ar-H);13C NMR (75 MHz, CDCl3) 5 (ppm) 127.3, 129.0, 129.1, 129.5, 129.6, 130.1, 130.2, 136.7, 141.5, 142.2,143.3, 151.7; MS (ESI) m/z 207 (M+H)+; HRMS(ESI) Calcd for C^H^N (M+H)+ 207.0922, found 207.0929.

(3b) 6-methyl-2-phenylquinoxaline: White colour solid; mp 134-136oC; *H NMR (300 MHz, CDCl3) 5 (ppm) 2.62 (s, 3H, Ar-CH3), 7.61-7.42 (m, 4H,Ar-H), 8.03-7.82 (m, 2H, Ar-H), 8.18 (m, 2H, Ar-H), 9.24 (d, J =7.3MHz, 1H,Ar-H); 13C NMR (75MHz, CDCl3) 5 (ppm) 20.1, 127.2, 127.9, 128.4, 128.8,129.6, 136.9, 139.9, 140.3, 140.6, 140.9, 142.2, 150.8; MS (ESI) m/z 220(M+H)+; HRMS (ESI) Calcd for C^H^N (M+H)+ 220.1082, found 220.1085.

(3c) 6,7-dimethyl-2-phenylquinoxaline: Light yellow colour solid; mp 122-124oC; *H NMR (300 MHz, CDCl3) 5 (ppm) 2.51 (s, 6H, Ar-CH3), 7.56-7.41 (m, 3H, Ar-H), 7.89-7.79 (m, 2H, Ar-H), 8.20-8.12 (m, 2H, Ar-H), 9.19 (s,1H, Ar-H); 13C NMR (CDCl3, 75MHz) 5 (ppm) 20.3, 20.4, 127.3, 128.1, 128.6, 129.0, 129.8, 140.1, 140.8, 142.4; MS (ESI) m/z 234 (M+H)+; HRMS (ESI)Calcd for C16H14N2 (M+H)+ 234.1220, found 234.1223.

(3d) 2-(3-nitrophenyl)quinoxaline: Light orange colour solid; mp 185-187oC; ‘H NMR (300MHz, CDCl3) 5 (ppm) 7.72-7.90 (m, 3H, Ar-H), 8.118.25 (m, 2H, Ar-H), 8.30 (td, 1H, .7(1,2) = 8.3, 7(1,3) =2.3, 7(1,3) =1.5, , Ar-H), 8.6(d, 1H, 7=8.3, Ar-H), 9.09-9.15(m, 1H, Ar-H), 9.41(s, 1H, Ar-H); 13C NMR(CDCl3, 75MHz) 5 (ppm) 122.5, 124.7, 129.2, 129.8, 130.2, 130.5, 130.9, 133.1, 142.5; MS (ESI) m/z: 252 (M+H)+; HRMS (ESI) Calcd for C14H9N3O2(M+H)+ 252.1652 found 252.1657.

(3e) 3-(quinoxalin-2-yl) benzenamine: Yellow colour solid; mp 163-165oC; 3H NMR (500 MHz, CDCl3) 5 (ppm) 3.80 (bs, 2H, -NH2), 6.76 (dd, 1H, 7(1,2) =2.9, 7(1,3)=8.9, Ar-H), 7.20-7.33(m, 1H, Ar-H), 7.45-7.59 (m, 2H,Ar-H), 7.64-7.80(m, 2H, Ar-H), 8.09(s, 2H, J=10.9, Ar-H), 9.25 (s, 1H, Ar-H);13C NMR (CDCl3, 75MHz) 5 (ppm) 113.8, 117.0, 117.8, 129.1, 129.4, 129.5, 130.1, 130.2, 137.8, 141.6, 142.2, 143.5, 147.3, 152.0; MS (ESI) m/z :222(M+H)+; HRMS (ESI) Calcd for C16H11N3 (M+H)+ 222.1249, found 222.1258.

(3f) 6-methyl-2-p-tolylquinoxaline: Milky white colour solid; mp 146-147oC; 3H NMR (300 MHz, CDCl3) 5 (ppm) 2,45(s, 3H, Ar-CH3), 2.61(s, 3H, Ar-CH3), 7.31 (d, 7 =8.3, 3H, Ar-H), 7.59-7.47 (m, 1H, Ar-H), 8.02-7.79 (m,2H, Ar-H), 8.07 (d, 7 =8.3, 2H, Ar-H), 9.22 (d, 7 =7.5, 1H, Ar-H); 13C NMR(CDCl3, 75MHz) 5 (ppm) 21.3, 128.7, 129.1, 129.2, 129.3, 129.4, 130.3, 142.7, 142.8, 150.9; MS (ESI) m/z 234 (M+H)+; HRMS (ESI) Calcd for C16H14N2(M+H)+234.1230, found 234.1237.

(3g) 6,7-dimethyl-2-p-tolylquinoxaline: Light brown colour solid; mp 127-129oC; 3H NMR (300 MHz, CDCl3) 5 (ppm) 2,45 (s, 3H, Ar-CH3), 2.51(s, 6H, Ar-CH3), 7.30 (d, 7 = 8.0, 2H, Ar-H), 7.82 (d, 7 = 9.5, 2H, Ar-H), 8.05(d, 7 = 8.0, 2H, Ar-H), 9.17 (s, 1H, Ar-H); 13C NMR (75MHz, CDCl3) 5 (ppm)21.3, 22.9, 128.5, 129.0, 129.1, 129.3, 139.9, 140.3, 141.3, 142.9, 151.9; MS(ESI) m/z 248 (M+H)+; HRMS (ESI) Calcd for C16H14N2 (M+H)+ 248.1390,found 248.1398.

(3h) 2-p-tolylquinoxaline: Brown colour solid; mp 90-92oC; 3H NMR ( 300 MHz, CDCl3) 5 (ppm) 2.45 (s, 3H, Ar-CH3), 7.37-7.29 (m, 2H, Ar-H),7.77-7.64 (m, 2H, Ar-H), 8.14-8.04 (m, 4H, Ar-H), 9.28 (s, 1H, Ar-H); 13CNMR (75 MHz,CDCl3) 5 (ppm) 21.4, 127.4, 129.0, 129.2, 129.5, 129.8, 130.1, 133.9, 140.4, 141.4, 142.2, 143.2, 151.7; MS (ESI) m/z: 220 (M+H)+; HRMS(ESI) Calcd for C15H12N2 (M+H)+ 220.1080, found 220.1083.

(3i) 2-(4-fluorophenyl) quinoxaline:16 Yellow colour solid; mp: 120-122oC; 3H NMR (JCAMP, CDCl3) 5 (ppm) 7.18-7.28 (m, 2H, Ar-H), 7.677.82 (m, 2H, Ar-H), 8.06-8.12 (td, 2H, Ar-H), 8.18-8.27 (m, 2H, Ar-H), 9.27 (s, 1H, Ar-H); 13C NMR (75 MHz, CDCl3) 5 (ppm) 116.0, 116.3, 129.1, 129.4,129.5, 129.5, 130.3, 132.9, 142.8, 150.6, 165.8; MS (ESI) m/z 225 (M+H)+;HRMS (ESI) Calcd for C14H9FN2 (M+H)+ 225.0924, found 225.0929.

(3j) 2-(4-nitro-phenyl)-quinoxaline: Yellow colour solid; mp 187-189oC; 3H NMR (400 MHz, CDCl3) 5 (ppm) 7.77-7.85 (m, 2H, Ar-H), 8.11-8.18 (m,2H, Ar-H), 8.40 (s, 4H, Ar-H), 9.36 (s, 1H, Ar-H); 13C NMR (75 MHz, CDCl3)5 (ppm) 127.7, 128.4, 129.2, 130.1, 130.8, 131.4, 133.0,138.6, 142.8, 147.0,149.1; MS (ESI) m/z 252(M+H)+; HRMS (ESI) Calcd for C14H9N3O2 (M+H)+252.0756, found 252.0766.

(3k) 4-quinoxalin-2-yl-aniline: Black colour solid; mp 167-169oC; 3H NMR (500MHz, CDCl3) 5 (ppm) 6.76 (dd, 1H, 7=8.9,7= 3.0, Ar-H), 7.29 (t, 1H, 7 =7.9, Ar-H), 7.45-7.58 (m, 2H), 7.64-7.79 (m, 231, Ar-H), 8.09 (t, 2H, 7 = 10.8, Ar-H), 9.25 (s, 1H, Ar-H); 13C NMR (75MHz, CDCl3) 5 (ppm)113.7, 116.9, 117.6, 129.0, 129.3, 129.4, 129.9, 130.1, 137.7, 141.4, 142.1,143.4, 147.2; MS (ESI) m/z 222 (M+H)+; HRMS (ESI) Calcd for C16H11N3(M+H)+ 222.1392, found 242.1410.

(3l) 2-(6-chloropyridin-3-yl)quinoxaline: White solid; M.P; 135-137oC; 3H NMR (300 MHz, CDCl3): d 9.32 (s, 1H), 9.19 (d, 1H, 7 = 2.26 Hz), 8.49-8.53(dd, 1H, 7 = 2.2, 5.28 Hz), 8.16-8.10 (m, 2H), 7.85-7.76 (m, 2H), 7.51 (d, 1H,7 = 8.3 Hz); IR (KBr): 2978, 2853, 1624, 1580, 1476, 1364, 1208, 1104, 946cm'1; EIMS: m/z: (M+H)+: 242.0.

(3m) 2-(6-chloropyridin-3-yl)-7-methylquinoxaline: White solid; M.P; 151-153oC; 3HbNMR (300 MHz, CDCl3+DMSO): d 9.33 (d, 2H, J= 5.12),9.21 (d, 2H, 7 = 2.92 Hz), 8.61-8.54 (dd, 2H, 7 = 2.9, 5.8 Hz), 8.04-7.95 (dd,2H, 7 = 2.9, 5.8 Hz), 7.92-7.86 (m, 2H), 7.68-7.58 (m, 2H), 7.53 (d, 2H, 7 = 8.7Hz), 2.65 (s, 6H); IR (KBr): 2920, 2853, 1872, 1630, 1580, 1436, 1322, 1210,1104, 1007, 870 cm’1; EIMS: m/z: (M+H)+: 256.0.

(3n) 2-(6-chloropyridin-3-yl)-6,7-dimethylquinoxaline: Colourless solid; M.P; 170-172oC; 1H NMR (300 MHz, CDCl3): d 9.22 (s, 1H), 9.18 (d, 1H,7 = 2.2 Hz), 8.49-8.53 (dd, 1H, 7 = 2.2, 6.0 Hz), d 7.88 (d, 2H, 7 = 3.7 Hz),7.51 (d, 1H, 7 = 8.3 Hz), 2.57 (s, 6H); 13C NMR (75 MHz, CDCl3): d 152.6, 148.2, 147.0, 141.4, 141.2, 140.9, 137.1, 131.6, 128.5, 128.1, 124.5, 116.2, 29.6, 20.3; IR (KBr): 2978, 2920, 2853, 1624, 1580, 1528, 1476, 1436, 1364,1322, 1208, 1104, 1052 cm-1; ESIMS: m/z: (M+H)+: 270.0; HRMS calculatedfor C15H12ClN3 270.0798. Found. 270.0790.

(3o) Brown colour solid. mp 92-94oC; 1H NMR (300 MHz, CDCl3) 5 (ppm) 6.65- 6.79 (m, 3H, Ar-H), 7.08-7.20 (m, 2H, Ar-H), 7.65-7.80 (m, 2H,Ar-H), 8.05-8.13 (m, 2H, Ar-H), 8.16- 8.25 (m, 2H, Ar-H), 9.27 (s, 1H, Ar-H); 13C NMR (300 MHz, CDCl3) 5 (ppm) 96.1, 107.7, 108.0, 110.5, 110.8, 119.6, 120.9, 127.9, 128.0, 128.2, 129.2, 129.4, 129.5, 129.6, 129.7, 130.1, 130.2, 142.5, 156.7, 166.8; MS (ESI) m/z 362 (M+H)+; HRMS(ESI) Calcd forC20H12FN3O3(M+H)+ 362.0940, found: 362.0926.

ACKNOWLEDGEMENTS

Financial supports from Council of Scientific and Industrial Research and Indian Institute of Chemical Technology are gratefully acknowledged.

REFERENCES

1. Ali M. M., Ismail M. M. F., EI-Gabby M. S. A., Zahran M. A., Ammar T.A., Molecules, 5, 864, (2000).         [ Links ]

2. Sarges R., Howard H. R., Browne R. C., Label L. A., Seymour P. A., 7.Med. Chem., 33, 2240, (1990).         [ Links ]

3. Sakata G., Makino K., Kurasawa Y., Heterocycles, 27, 2481, (1998).         [ Links ]

4. Arthur G., Elor K. B., Robert G. S., Guo Z. Z., Richard J. P., Stanley D.,John R. K., Sean T., 7. Med. Chem., 48, 744, (2005).         [ Links ]

5. Singh, S. K.; Saibaba, V.; Ravikumar, V.; Rudrawar, S. V.; Daga, P.; Rao,C. S.; Akhila, V.; Hegde, P.; Rao, Y. K. Bioorg. Med. Chem. 12, 1881,(2004).         [ Links ]

6. Katoh, A.; Yoshida, T.; Ohkanda, 7. Heterocycles, 52, 911, (2000).         [ Links ]

7. Thomas, K. R. J.; Velusamy, M.; Lin, J. T.; Chuen, C.-H.; Tao, Y.-T.Chem. Mater, 17, 1860, (2005).         [ Links ]

8. Dailey, S.; Feast, W. J.; Peace, R. J.; Sage, I. C.; Till, S.; Wood, E. L. 7.Mater. Chem. 11, 2238, (2001).         [ Links ]

9. Sascha, O.; Ru" diger, F. Synlett 1509, (2004).         [ Links ]

10. Sessler, J. L.; Maeda, H.; Mizuno, T.; Lynch, V. M.; Furuta, H. 7. Am.Chem. Soc. 124, 13474, (2002).         [ Links ]

11. Crossley, M. J.; Johnston, L. A. Chem. Commun. 1122, (2002).         [ Links ]

12. Dell, A.; William, D. H.; Morris, H. R.; Smith, G. A.; Feeney, J.; Roberts,G. C. K. 7.Am. Chem. Soc. 97, 2497, (1975).         [ Links ]

13. Bailly, C.; Echepare, S.; Gago, F.; Waring, M. 7. Anti-Cancer Drug Des.15, 291, (1999).         [ Links ]

14. Raw, S. A.; Wilfred, C. D.; Taylor, R. J. K. Org. Biomol. Chem. 2, 788,(2004).         [ Links ]

15. Aparicio, D.; Attanasi, O. A.; Filippone, P.; Ignacio, R.; Lillini, S.;Mantellini, F.; Palacios, F.; de los Santos, J. M. 7. Org. Chem. 71, 5897, (2006).         [ Links ]

16. Singh, S. K.; Gupta, P.; Duggineni, S.; Kundu, B. Synlett 2147, (2003).         [ Links ]

17. Antoniotti, S.; Dun~ach, E. Tetrahedron Lett. 43, 3971, (2002).         [ Links ]

18. Mao, L. Sakurai, H. Hirao, T. Synthesis 2535, (2004).         [ Links ]

19. Zhao, Z.; Wisnoski, D. D.; Wolkenberg, S. E.; Leister, W. H.; Wang, Y.;Lindsley, C.W. Tetrahedron Lett. 45, 4873, (2004).         [ Links ]

20. Jain N, Kumar A, Chauhan S & Chauhan, Tetrahedron 61, 1015, (2005)        [ Links ]

21. Galinski M, Lewandowski A & Stepniak I, Electrochimica Acta 51, 5567,(2006).         [ Links ]

22. R. M. Cowper and L. H. Davidson. Organic Syntheses, 5, 117, (2005).         [ Links ]

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons