SciELO - Scientific Electronic Library Online

 
vol.25 issue2Multiobjective reconfiguration in primary power distribution systemsNumerical and experimental analysis of a RVE condition for heterogeneous materials using BEM and thermal images author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


Ingeniare. Revista chilena de ingeniería

On-line version ISSN 0718-3305

Abstract

SANCHEZ HECHAVARRIA, Yanier; EDUARDO DINIZ, Anselmo  and  MARINO CALA, Mariza. Life and productivity of the cutting tool in milling hardened steel finish AISI D6. Ingeniare. Rev. chil. ing. [online]. 2017, vol.25, n.2, pp.205-216. ISSN 0718-3305.  http://dx.doi.org/10.4067/S0718-33052017000200205.

Finish milling of hardened steels at high speed has been limited by premature tool wear and dynamic instability. During finish milling of inclined surfaces with ball end mill, high interruptions occur during cutting and dynamic phenomena different to those that occur during milling flat surfaces. In this work the influence of dynamic stability in efficiency and productivity of inclined surface finish milling in hardened steel AISI D6 with high speeds, was studied. The experiments were performed on a machining center MORI SEIKI SV40 with CNC control. They were used as well, interchangeable carbide tools and two tool holder, one of steel and the other of carbide. The evaluation of the dynamic stability was based on the analysis of the spectra frequency of cutting radial forces obtained through Fast Fourier Transform (FFT) and Root Main Square (RMS) of the signal in time domain. It was confirmed that in more stable processes, the volume of removed chip and the cut area by the tool are larger, resulting in an increase of the process productivity and obtaining besides an increase of the tool life and better results in the surface finish workpiece.

Keywords : Milling hardened steel; productivity; roughness surfaces; dynamical stability.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )