SciELO - Scientific Electronic Library Online

 
vol.23Evaluation of wetting, structural and thermal properties of electrospun nanofibers at different pineapple leaf fiber / polyethylene terephthalate ratiosShear and adhesion strength of open and closed system heat-treated wood samples índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Maderas. Ciencia y tecnología

versión On-line ISSN 0718-221X

Resumen

BAYSAL, Ergün et al. Weathering characteristics of impregnated and coated Calabrian pine wood. Maderas, Cienc. tecnol. [online]. 2021, vol.23, 31.  Epub 03-Abr-2021. ISSN 0718-221X.  http://dx.doi.org/10.4067/s0718-221x2021000100431.

This study was designed to investigate the weathering characteristics of Calabrian pine (Pinus brutia) wood. The wood specimens were impregnated with some copper-based chemicals and then varnish coated. As copper-based chemicals, Celcure C4, Korasit KS, and Tanalith E 8000 were used for impregnation. Polyurethane varnish (PV) and water-based varnish (WBV) were used as coating materials. Firstly, Calabrian pine wood was impregnated with 2,5 % and 5 % aqueous solutions of chemicals then coated with PV and WBV. Impregnated and coated Calabrian pine wood specimens were subjected to 6 months of natural weathering in Muğla, Turkey. After weathering, surface hardness, surface roughness, and adhesion strength changes of Calabrian pine wood specimens were determined. Impregnation caused to increase in surface hardness values of Calabrian pine. Surface hardness increases of WBV coated Calabrian pine specimens were higher than that of PV coated Calabrian pine specimens. Impregnation resulted in higher surface roughness values of Calabrian pine specimens. PV coated Calabrian pine specimens gave higher surface roughness than that of WBV coated Calabrian pine specimens. The adhesion strength values of all treatment groups were decreased after weathering. In general, adhesion strength decreases of WBV coated Calabrian pine specimens were higher than that of PV coated Calabrian pine specimens. The concentration levels of chemicals did not have a significant effect on surface roughness and adhesion strength of Calabrian pine wood after weathering.

Palabras clave : Adhesion strength; Calabrian pine; impregnation; surface hardness; surface roughness; varnish; weathering performance..

        · texto en Inglés     · Inglés ( pdf )