SciELO - Scientific Electronic Library Online

 
vol.17 número3Effect of nanoclay contents on properties, of bagasse flour/reprocessed high density polyethylene/nanoclay compositesMineral content in relation to radial position, altitude, chemical properties and density of Persian ironwood índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Maderas. Ciencia y tecnología

versión On-line ISSN 0718-221X

Resumen

DZIURKA, Dorota; MIRSKI, Radossław; DUKARSKA, Dorota  y  DERKOWSKI, Adam. Possibility of using the expanded polystyrene and rape straw to the manufacture of lightweight particleboards. Maderas, Cienc. tecnol. [online]. 2015, vol.17, n.3, pp.647-656.  Epub 30-Jun-2015. ISSN 0718-221X.  http://dx.doi.org/10.4067/S0718-221X2015005000057.

The study investigated the possibility of using rape straw and expanded polystyrene for the production of low density particleboards. Particleboards with the core layer made of wood chips or rape straw, partly substituted with polystyrene (7%), were manufactured within the density range of 500 - 650 kg/m3, and resinated with MUF resin. Our study confirmed that wood chip-expanded polystyrene (WP) and wood chip-rape straw-expanded polystyrene boards (WRP), of density reduced to 600 kg/m3, met the mechanical requirements of the subject standard for boards intended for interior design (including furniture) and used in dry conditions. However, further density reduction required an increased resination of the core layer.

Palabras clave : Lightweight boards; rape; polystyrene; MUF resin; mechanical properties.

        · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons