SciELO - Scientific Electronic Library Online

 
vol.14 issue1Chemical acetylation treatment in radiata pine wood author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

Share


Maderas. Ciencia y tecnología

On-line version ISSN 0718-221X

Abstract

REY-PRIETO, Adrián  and  RIESCO-MUNOZ, Guillermo. Influence of blue stain on density and dimensional stability of Pinus sylvestris timber. Maderas, Cienc. tecnol. [online]. 2012, vol.14, n.1, pp.115-125. ISSN 0718-221X.  http://dx.doi.org/10.4067/S0718-221X2012000100010.

Pinus sylvestris timber is commercially important, but its value is considerably decreased by the effects of blue stain fungi. Seven pine trees from Spanish plantations were felled for the study, and 14 discs were sampled from different heights in their stems. When the discs showed partial discolouration due to fungal infection, they were cut to produce small defect-free specimens for determining density and dimensional stability (in volume and in the three main dimensions of wood). The physical properties of fully stained and stain free specimens were compared, in each disc, by one-factor analysis of variance. This method enabled analysis of the specific influence of the blue stain fungi while avoiding other sources of variation: tree factor, height in the stem, ring width, presence of sapwood and cambial age. However, the only significant differences between discoloured and unstained wood were in the density and axial shrinkage, in some discs (the density of the blue-stained wood was 1% higher and the axial shrinkage 13% higher than in the unstained wood).

Keywords : Scots pine; Pinus sylvestris; density; shrinkage; blue stain.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License