SciELO - Scientific Electronic Library Online

vol.13 issue2Radial and longitudinal basic density variation in 16 years old Eucalyptus regnans trees author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand




Related links


Maderas. Ciencia y tecnología

On-line version ISSN 0718-221X


PEREIRA, Miguel Angel; RUDOLF, Patt  and  KORDSACHIA, Othar. Effect of sodium sulfite charge in NSSC pulping of E. globulus. Maderas, Cienc. tecnol. [online]. 2011, vol.13, n.2, pp.225-234. ISSN 0718-221X.

This paper presents experimental results on the effect of adding high doses of sodium sulphite (Na2SO3) to replace other sources of alkali, such as Na2CO3 or NaOH, in high-yield Neutral Semichemical Pulping (NSSC) process. Sodium sulfite (Na2SO3) was used as delignification agent in the chemical stage of eucalyptus globulus pulping. A 12" Bauer refiner was employed in the mechanical stage. Pulp yields ranged within 70-90% and, results show that physical and mechanical properties increased significantly as yields decreased. Moreover, the defibration energy consumption and beatings energy also showed a significant decrease. Those pulps featuring yields near 80%, obtained with high sodium sulfite loads, presented similar physical and mechanical properties as chemical pulps. At the largest sulfide dose used here, no significant increase in chemical consumption was observed, especially at high yields. This study shows that physical and chemical properties are enhanced by high hemicelluloses content, and process selectivity to remove lignin from the middle lamella, which leads to a fiber integrity and reduced mechanical stress.

Keywords : Semichemical pulp; Eucalyptus globulus; high yield pulp.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )


Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License