SciELO - Scientific Electronic Library Online

 
vol.10 número3PROPIEDADES FÍSICAS Y MECÁNICAS DE PANELES A BASE DE PARTÍCULAS DE CORTEZA EXTERNA DE ABETO BLANCO: MEZCLA DE PANELES CON PARTÍCULAS DE MADERA VERSUS FIBRA DE MADERANATURAL TANNIN-BASED RIGID FOAMS AS INSULATION FOR DOORS AND WALL PANELS índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

Compartir


Maderas. Ciencia y tecnología

versión On-line ISSN 0718-221X

Resumen

SALINAS, Carlos; ANANIAS, Rubén  y  RUMINOT, Pamela. PHENOMENOLOGICAL MODELING OF HIGH TEMPERATURE DRYING CURVES OF RADIATA PINE. Maderas, Cienc. tecnol. [online]. 2008, vol.10, n.3, pp.207-217. ISSN 0718-221X.  http://dx.doi.org/10.4067/S0718-221X2008000300004.

Experiments at industrial scale to show the high temperature wood drying of radiate pine were performed. After that, physical parameters of transport phenomena (global heat and mass transfer coefficients), required by the phenomenological mathematical models for the simulation of the drying process, were determined. Results of global heat transfer coefficients, experimental drying curves and simulated process were shown. It was concluded that the simulation of the drying process at high temperature of radiata pine can be satisfactorily carried out by phenomenological model based on the global mass transfer coefficient. The values of these coefficients were between 1x 10-4 and 4.2 x 10-4 kg/m2s.

Palabras clave : High temperature drying; drying modeling; mass transfer coefficient; Pinus radiata.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons