SciELO - Scientific Electronic Library Online

 
vol.25 número1ESTUDIO DE LAS FUERZAS DE AVANCE EN UN PROCESO DE TALADRADO UTILIZANDO BROCAS CON GEOMETRÍA MEJORADAANÁLISIS MORFOLÓGICO EN EL PROCESAMIENTO ÓPTICO-DIGITAL DE IMÁGENES PARA EL DIAGNÓSTICO DE LA DISQUINESIA CILIAR índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

Compartir


Información tecnológica

versión On-line ISSN 0718-0764

Resumen

APERADOR, Willian; MEJIA, Aura S  y  CAICEDO, Julio. CORROSION-EROSION BEHAVIOR IN COATINGS OF TiN /ZrN DEPOSITED ON AISI 4140 STEEL. Inf. tecnol. [online]. 2014, vol.25, n.1, pp.23-32. ISSN 0718-0764.  http://dx.doi.org/10.4067/S0718-07642014000100004.

Thin films of titanium nitride/zirconium nitride were deposited on AISI 4140 steel by a multi-target magnetron sputtering system with radio frequency. The process was developed under the substrate rotation system which allowed placing the substrate against the titanium and zirconium targets, generating the super-lattice with periods of 1, 50, 100, and 200 bilayers. The multilayers were evaluated against the corrosion-erosion synergy in a solution composed by 3% NaCl and silica. The electrochemical characterization was performed by electrochemical impedance spectroscopy. After the mechanic and electrochemical tests the surface was evaluated using scanning electron microscopy. By performance analysis it was observed that the material with higher synergic effect was the substrate. It is also shown that by increasing the bilayers in the system titanium nitride/zirconium nitride the corrosive phenomenon controls the material deterioration.

Palabras clave : multilayer; sputtering; corrosion; erosion; wear; coating.

        · resumen en Español     · texto en Español     · Español ( pdf )