SciELO - Scientific Electronic Library Online

 
vol.63 número2MAGNETIC ANALYSIS OF TWO [COBALT-IMIDAZOLE-CARBOXYLATE] COMPLEXES: ORBITAL CONTRIBUTIONSYNTHESIS AND FIELD TEST OF A PHEROMONE ANALOG OF CHILECOMADIA VALDIVIANA índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Journal of the Chilean Chemical Society

versión On-line ISSN 0717-9707

Resumen

RIVAS, Bernabé L.; MORALES, Daniela V.; KABAY, Nalan  y  BRYJAK, Marek. Cr(III) REMOVAL FROM AQUEOUS SOLUTION BYION EXCHANGE RESINS CONTAINING CARBOXYLIC ACID AND SULPHONIC ACID GROUPS. J. Chil. Chem. Soc. [online]. 2018, vol.63, n.2, pp.4012-4018. ISSN 0717-9707.  http://dx.doi.org/10.4067/s0717-97072018000204012.

Ion exchange resins based on the water-insoluble polymers poly(acrylamide-co-styrene sodium sulfonate) (P(AAm-co-ESS)), poly(2-acrylamide-2-methyl-1-propanesulfonic acid-co-acrylicacid) (P(APSA-co-AAc)),poly(2-acrylamidoglycolic acid-co-2-acrylamide-2-methyl-1-propane sulfonic acid) (P(AAGA-co-APSA)), and poly(2-acrylamidoglycolic acid-co-4-styrene sodium sulfonate) (P(AAGA-co-ESS)) were synthesized by radical polymerization. These polymers were employed to remove Cr(III) from an aqueous solution. The optimum sorption parameters of amount of resin and sorption time were obtained through batch-mode sorption tests. Following batch elution tests to identify the best eluting agent. Finally, the column-mode sorption/elution behaviors of ion exchange resins were studied.

The ion exchange resins exhibited excellent removal of Cr(III). The P(AAGA-co-APSA) resin exhibited 89.4% removal, while P(AAGA-co-ESS) displayed 88.3%, P(AAm-co-ESS) 86.8%, and P(APSA-co-AAc) 89.3%. The column-mode was studied by the P(AAGA-co-APSA) resingave a breakthrough capacity of 1.5 mg Cr(III)/mL resin in the first cycle. The elution efficiency was almost 100%. The breakthrough capacity was 1.2 mg Cr(III)/mL resin in the second cycle. The elution efficiency was 90.2% in the second cycle.

Palabras clave : ion exchange resins; chromium; removal; batch and column methods.

        · texto en Inglés     · Inglés ( pdf )