SciELO - Scientific Electronic Library Online

 
vol.39 número3La Altura del Cuerpo y su Estimación Utilizando Medidas de la Longitud de la Escápula de Adolescentes Montenegrinos de Ambos SexosDisposición Infrecuente de la Arteria Digital Palmar Propia Radial del Índice índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


International Journal of Morphology

versión On-line ISSN 0717-9502

Resumen

WANG, Sen; BING, Li  y  PARK, Hyo-Sang. Optimal Microimplant Sites in the Mandibular Retromolar Area: Mesh Analysis of Cortical Bone Thickness and Density in CBCT Images. Int. J. Morphol. [online]. 2021, vol.39, n.3, pp.907-914. ISSN 0717-9502.  http://dx.doi.org/10.4067/S0717-95022021000300907.

This study was performed to identify optimal microimplant sites in the mandibular retromolar area by measurement and analysis of cortical bone thickness and density. Forty-nine records of cone-beam computed tomography were selected from 173 patients. Invivo 5.2 software was used to measure the thickness and density of 25 sites on a mesh in the mandibular retromolar area. Pearson correlation, Spearman correlation, and binary logistic regression analyses were performed to explore correlations between retromolar measurements and patient characteristics. The LSD test was used to identify optimal microimplant sites in this area. One-way ANOVA, with post hoc SNK test, was used to compare optimal microimplant sites among the retromolar area, the distobuccal bone of the second molar, and a location between the first and second molars. The mean thickness and density of mandibular retromolar cortical bone were 2.35 ± 0.76 mm and 530.49 ± 188.83 HU, respectively. In the mandibular retromolar area, the thickness and density of cortical bone increased from the lingual to buccal sides, and from the distal to mesial. Among 25 sites, S5C1 had the greatest thickness and density; it exhibited greater thickness and density, compared with the distobuccal bone of the second molar and the site between the first and second molars. For distal uprighting of mesially tipped molars, we recommend placement of microimplants into the retromolar distobuccal site; for distalization of mandibular dentition, we recommend placement of microimplants into the retromolar mesiobuccal site (S5C1) or 2 mm from the mesial direction of the second molar distobuccal site (B).

Palabras clave : Retromolar; Microimplant sites; Thickness; Density; Mesh analysis.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )