SciELO - Scientific Electronic Library Online

 
vol.38 número5Pruebas Estadísticas para el Análisis de Datos en Morfología DentalEfectos de Corchorus olitorius y Ácido Protocatéquico en el Tejido Testicular de Rata Diabética índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


International Journal of Morphology

versión On-line ISSN 0717-9502

Resumen

YANG, Huifang  y  WANG, Siwei. Research on a Segmentation and Evaluation Method Combining Tooth Morphology Features. Int. J. Morphol. [online]. 2020, vol.38, n.5, pp.1325-1329. ISSN 0717-9502.  http://dx.doi.org/10.4067/S0717-95022020000501325.

To explore a new semi-automatic method to segment the teeth from the three-dimensional volume data which acquired from cone beam computed tomography (CBCT) scanner. Scanned dental cast models are used to evaluate the segmentation accuracy. The CBCT data are loaded to ORS software. Based on gray value, a semi-automatic method was used to segment teeth and then the segmented teeth were saved in STL format data. Smooth the mesh data in the Geomagic Studio software. The upper and lower dental cast models were scanned by a white light scanner and the data was saved in STL format too. After registering the model data to teeth data, the deviation between them was analyzed in the Geomagic Qualify. All teeth could be obtained, the method is simple to use and applied in orthodontic biomechanics. The entire process took less than 30 minutes. The actual measured Root Mean Square (RMS) value is 0.39 mm, less than 0.4 mm. This method can segment teeth from the jaw quickly and reliably with a little user intervention. The method has important significance for dental orthodontics, virtual jaw surgery simulation and other stomatology applications.

Palabras clave : Cone beam computed tomography; 3D scanner; Segmentation; Digital orthodontics.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )