SciELO - Scientific Electronic Library Online

 
vol.37 número4Descripción Histológica de los Daños Ocasionados por Monoiodo Acetato de Sodio en Articulación Humeral de RataHiposialia y Xerostomía Post Irradiación: Terapias Innovadoras en el Campo Biomolecular índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


International Journal of Morphology

versión On-line ISSN 0717-9502

Resumen

GUERRERO, Marco et al. Development of a Sheet Plastination Protocol with Polyester Resin Applied to Human Brain Slices. Int. J. Morphol. [online]. 2019, vol.37, n.4, pp.1557-1563. ISSN 0717-9502.  http://dx.doi.org/10.4067/S0717-95022019000401557.

Plastination is an anatomical technique of cadaveric conservation created in 1977 by Gunther von Hagens, in Heidelberg, Germany, and that substitutes biological and / or fixation fluids with acetone, to then impregnate the samples with different resins, depending on the developed plastination technique, to finally carry out the polymerization of the components incorporated into the samples, to obtain dry and totally durable biological samples. The aim of this work was to develop a sheet plastination protocol with polyester resin (Biodur® P40) in 3 mm thick slices of human brain. The samples were fixed and preserved with 10 % formalin. The brains were sectioned with a slice cut machine, obtaining thin sheets of 3 mm thick. Immediately the slices of brain were placed in dehydration in 100 % acetone, at -25 °C, for 7 days the first acetone bath, and for another 3 more days, for the second acetone bath. Once the cuts were dehydrated, they were placed in Biodur® P40 polyester resin and the forced impregnation was carried out in a vacuum chamber at room temperature (20 °C). Once the forced impregnation was finished, the curing stage was carried out, which first consists in the assembly of the curing chambers within which the slices with polyester resin were placed. The curing chambers were placed under UV light to accelerate the polymerization of the polyester and finished the plastination process. A sheet plastination protocol with polyester resin was successfully developed in the Laboratory of Plastination and Anatomical Techniques of Universidad de La Frontera, obtaining excellent conservation of brain slices, with differentiation of gray and white substances, and conservation of all morphological characteristics.

Palabras clave : Sheet Plastination; Polyester resin.

        · resumen en Español     · texto en Español     · Español ( pdf )