SciELO - Scientific Electronic Library Online

 
vol.47 número1CYCLIZATION PROCEDURES TOWARD THE SYNTHESIS OF SOME CONFORMATIONALLY RESTRICTED NITROGEN HETEROCYCLESESTUDIO DE LA COPOLIMERIZACIÓN POR INJERTO DE ACRILONITRILO EN FIBRA CELULOSICA SECUNDARIA índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

Compartir


Boletín de la Sociedad Chilena de Química

versión impresa ISSN 0366-1644

Resumen

LISPERGUER, JUSTO  y  DROGUETT, CYNTHIA. CARACTERIZACION DEL CURADO DE RESINAS UREA FORMALDEHIDO POR CALORIMETRÍA DIFERENCIAL DE BARRIDO (DSC). Bol. Soc. Chil. Quím. [online]. 2002, vol.47, n.1, pp.33-38. ISSN 0366-1644.  http://dx.doi.org/10.4067/S0366-16442002000100007.

Urea Formaldehyde resins were prepared in a two step condensations process with molar ratios of Formaldehyde / Urea that fluctuated between 1.10 - 1.40. The thermal behavior of the curing process was studied by Differential Scanning Calorimetry (DSC) under different environmental conditions. The DSC thermograms of UF resins, with NH4Cl as catalyst, showed that main crosslinking reactions, for resins with low molar formaldehyde levels, took place at 100ºC. Crosslinking reactions, for resins without catalyst or with high formaldehyde molar ratios, took place at temperature between 120 - 180ºC

Palabras clave : Urea Formaldehyde resin; curing; exothermic reactions; Differential Scanning Calorimetry.

        · resumen en Español     · texto en Español

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons