SciELO - Scientific Electronic Library Online

SciELO - Scientific Electronic Library Online

Referencias del artículo

APERADOR CHAPARRO, Willian; RODRIGUEZ ZAMORA, Geovanny  y  FRANCO, Fernando. Comportamiento de la corrosión de aleaciones de magnesio AZ31-B en ambiente marino, modificadas por el proceso de fricción-agitación. Ingeniare. Rev. chil. ing. [online]. 2012, vol.20, n.1, pp. 119-125. ISSN 0718-3305.  http://dx.doi.org/10.4067/S0718-33052012000100012.

    [1] F. Franco, H. Sánchez, D. Betancourt y O. Murillo. "Soldadura por fricción-agitación de aleaciones ligeras, una alternativa a nuestro alcance". Revista Latinoamericana de Metalurgia y Materiales. Vol. S1, No 3, pp. 1369-1375. Julio 2009. [ Links ]

    [2] W.M. Thomas, E.D. Nicholas and S.D. Smith. "FSW-Tool developments". TMS Annual Meeting and exhibition Al joining. Vol. 1, Issue 1, pp. 1-12. January, 2001. [ Links ]

    [3] A. Wendt, K. Weiss, A. Ben-Dov, M. Bamberger and B. Bronfin. "Magnesium Technology". TMS Warrendale. Vol. 15, Issue 2, pp. 269-273. February, 2005. [ Links ]

    [4] S. Schumann and H. Friedrich. "Effect of Friction Stir Processing on Microstructure and Mechanical Properties of a Cast-Magnesium". Rare Earth Alloy. Mater. Sci. Forum. Vol. 51, Issue 3, pp. 419-422. April, 2003. [ Links ]

    [5] Z.Y. Ma. "Friction Stir Processing Technology: A Review". Metall. Mater. Trans. Vol. 39A, Issue 3, pp. 642-658. March, 2008. [ Links ]

    [6] C.I. Chang, C.J. Lee and J.C. Huang. "Relationship between grain size and Zener-Holloman parameter during friction stir processing in AZ31 Mg alloys". Scripta Mater. Vol. 51, Issue 6, pp. 509-514. July, 2004. [ Links ]

    [7] B.M. Darras, M.K. Khraisheh, F.K. Abu-Farha and M.A. Omar. "Friction stir processing of commercial AZ31 magnesium alloy". Journal of Materials Processing Technology. Vol. 191, Issue 1-3, pp. 77-81. March, 2007. [ Links ]

    [8] Z.Y. Ma, A.L. Pilchak, M.C. Juhas and J.C. Williams. "Microstructural refinement and property enhancement of cast light alloys via friction stir processing". Scripta Mater. Vol. 58, Issue 5, pp. 361-366. November, 2008. [ Links ]

    [9] R.C. Zeng, J. Chen, W. Dietzel, R. Zettler, J.F. dos Santos, M.L. Nascimento and K.U. Kainer. "Corrosion of friction stir welded magnesium alloy AM50". Corrosion Science. Vol. 51, Issue 8, pp. 1738-1746. May, 2009. [ Links ]

    [10] M. Kannan, W. Dietzel, R. Zeng, R. Zettler and J.F. dos Santos. "A study on the SCC susceptibility of friction stir welded AZ31 Mg sheet". Materials Science and Engineering A. Vol. 460-461, Issue 1, pp. 243-250. January, 2007. [ Links ]

    [11] Z. Rong-chang. "Review of studies on corrosion of magnesium alloys". Transactions of Nonferrous Metals Society of China. Vol. 16, Supplement 2, pp. 763-771. June, 2006. [ Links ]

    [12] C. Liu, D.L. Chen, S. Bhole, X. Cao and M. Jahazi. "Polishing-assisted galvanic corrosion in the dissimilar friction stir welded joint of AZ31 magnesium alloy to 2024 aluminum alloy". Materials Characterization. Vol. 60, Issue 5, pp. 370-376. May, 2009. [ Links ]

    [13] C. Ying-liang and W. Hai-Ian. "Corrosion properties of AZ31 magnesium alloy and protective effects of chemical conversion layers and anodize coatings". Transactions of Nonferrous Metals Society of China. Vol. 17, Issue 3, pp. 502-508. May, 2007. [ Links ]

    [14] ASTM G1-03. "Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens". West Conshohocken, PA, American Society for Testing and Materials. 2003. [ Links ]

    [15] ASTM G3-89. "Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing". West Conshohocken, PA, American Society for Testing and Materials. 2010. [ Links ]

    [16] J. Zhao, F. Jiang and H. Jian. "Comparative investigation of tungsten inert gas and friction stir welding characteristics of Al-Mg-Sc alloy plates". Materials and Design. Vol. 31, Issue 1, pp. 306-311. January, 2010. [ Links ]

    [17] A. Squillace, A. De Fenzo and G. Giorleo. "A comparison between FSW and TIG welding techniques: modifications of microstructure and pitting corrosion resistance in AA 2024-T3 butt joints". Journal of Materials Processing Technology. Vol. 152, Issue 1, pp. 97-105. October, 2004. [ Links ]

    [18] G. Ben Hamua, D. Eliezer and L. Wagner. "The relation between severe plastic deformation microstructure and corrosion behavior of AZ31 magnesium alloy". Journal of Alloys and Compounds. Vol. 468, Issue 1-2, pp. 222-229. January, 2009. [ Links ]

    [19] N. Afrin, D.L. Chena and X. Cao. "Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy". Materials Science and Engineering A. Vol. 472, Issue 1-2, pp. 179-186. January, 2008. [ Links ]