Chilean journal of agricultural research
On-line version ISSN 0718-5839
Chilean J. Agric. Res. vol.69 no.2 Chillán June 2009
Chilean Journal of Agricultural Research 69(2):214-2223 (April-June 2009)
A Study of Dairy Farm Technical Efficiency Using Meta-Regression: An International Perspective
Un Estudio de Eficiencia Técnica en Lecherías Usando Meta-Regresión: Una Perspectiva Internacional
Víctor H. Moreira López1*, and Boris E. Bravo-Ureta2
1 Universidad Austral de Chile, Instituto de Economía Agraria, Campus Isla Teja, Valdivia, Chile. Corresponding author (email@example.com)
2 University of Connecticut, Department of Agricultural and Resource Economics, Storrs, 06269, Connecticut, USA .
Received: 25 October 2007. Accepted: 20 March 2008.
This paper develops a meta-regression analysis to explain the variation of mean technical efficiency (PETP) measurements from a total of 65 frontier studies that report technical efficiency (ET) measurements at the dairy farm level in the literature published in English and Spanish. The analysis includes the effect of methodology on ET measurements, as well as the effect of the econometric procedure on the meta-regression estimates. Eight models were estimated, and two of these were selected: a fixed effects specification with dummy variables for the most significant studies without geographical effects (EFS), and a specification where the multiple observations are averaged and geographical effects included (OP). Based on model performance, the EFS option is chosen for the analysis. The results of the EFS model suggested that non-parametric deterministic models generate higher PETP estimates than the parametric cases (stochastic and deterministic frontier models). In addition, the Cobb-Douglas and translog forms yield higher average PETP than all other functional forms, cross-sectional data produce higher ET estimates than panel data, and the PETP is higher when the study is input-oriented. The primal approach implies a higher ET estimate than the dual analysis, and when more variables are included in the model, the PETP value is higher.
Key words: meta-regression, frontier models, technical efficiency, dairy farms.
El objetivo de este estudio es realizar un análisis de meta-regresión para explicar la variación en el promedio de eficiencia técnica predial (PETP) en 65 estudios, en la literatura en inglés y español, desarrollados con datos a nivel predial y que reportan medidas de eficiencia técnica (ET). El estudio analiza tanto el efecto de la metodología empleada en la medición de
Palabras clave: meta-regresión, modelos de frontera, eficiencia técnica, lecherías.
In an environment of growing liberalization, productivity growth, which is a major element of competitiveness, is essential to insure the prosperity of agriculture in general and dairy farming in particular (Sandrey and Scobie, 1994; Pinstrup-Andersen, 2002; Ruttan, 2002). A clear example is New Zealand, which opened its economy to the world market at the beginning of 1984 and then experienced a clear improvement in farm technical efficiency (ET henceforth) (Sandrey and Scobie, 1994; Evans et al., 1996; Paul et al., 2000). This improvement in ET has occurred as New Zealand has experienced a marked increase in the value of dairy products exported (Blayney and Gehlhar, 2005). The measurement of ET is important because it can help in both policy formulation and farm management (Russell and Young, 1983; Kalirajan, 1984; Bravo-Ureta and Rieger, 1991). Producers benefit directly from improvements in their technical performance because more efficient farms tend to generate higher incomes and thus have a better chance of surviving and staying in business (Bravo-Ureta and Rieger, 1991; Dartt et al., 1999; Lawson et al., 2004).
In the past decades, many researchers have developed and applied diverse methods to evaluate ET at the farm level. Battese (1992), and Bravo-Ureta and Pinheiro (1993) reviewed selected articles in order to derive general conclusions about the range of ET and the performance of the methodologies reviewed. Rivas (2003) applied a meta-regression analysis to describe the behavior of ET for a limited group of dairy farm studies listed in selected databases in the English language literature. More recently, Bravo-Ureta et al. (2007) developed a meta-regression analysis of ET measures for all agricultural activities which includes 167 farm level studies from around the world.
In this paper we contribute to the existing literature by undertaking a meta-regression analysis focused on dairy farm ET. Thus, we examine the impact of various attributes of a dairy efficiency study (e.g., estimation technique, functional and sample size, among others) on ET estimates. In our analysis we also account for the possible lack of data independence stemming from the presence of multiple observations from the same study.
MATERIALS AND METHODS
A systematic search was made for dairy farm studies published in both English and Spanish between January 1986 and January 2006 in the following databases: Agricola; Agris International; Econlit; Factiva; Infotrac; Ingenta; JSTOR; ProQuest; Social Science Citation Index; Science Direct; Web of Knowledge; Web of Science; and the World Agricultural Economics and Rural Sociology Abstracts. A complementary search was performed in the following web databases: Blackwell Synergy; EconPapers; Scielo; SpringerLink; and Taylor & Francis. In addition, a search was performed in the following Spanish language literature sources: Dialnet (online database); Agrociencia (Mexico and Uruguay); Ciencia e Investigación Agraria (Chile); Cuadernos de Economía (Chile and Colombia); Economía Agraria y Recursos Naturales (Spain); Estudios de Economía Aplicada (Spain); Investigación Agraria, Producción y Sanidad Animales (Spain); Producción Animal (Spain); Revista Brasileira de Economía (Brazil); Revista de Análisis Económico (Chile); Revista Española de Estudios Agrosociales y Pesqueros (Spain); and Revista de Estudios Agrosociales (Spain).
Variable Definition and Empirical Models
The frontier function methodology, as introduced in the path breaking paper published by Farrell just over 50 years ago (1957), uses the efficient unit isoquant to measure economic efficiency (EE), and to decompose this measurement into ET and allocative efficiency (AE). In this model, ET is defined as the ability of the firm to produce maximum output given a set of inputs and the technology. AE measures the success of the firm in choosing the optimal input proportions, i.e., where the ratio of marginal products for each pair of inputs is equal to the ratio of their market prices. In Farrell's framework, EE is a measurement of overall performance and is equal to ET times AE (EE = ET x AE). These concepts are illustrated in Figure 1, where point P represents an inefficient firm and the distance QP is the amount by which all inputs could be reduced (proportionally) without lowering output to achieve the technically efficient level of production (point Q). Thus, the ET measurement is equal to the ratio 0Q/0P. Similarly, AE is equivalent to the ratio 0R/0Q.
The working hypothesis of this paper is that the variation in average farm ET (PETP henceforth) for dairy farms in published studies can be explained by the major attributes of the models used. For this purpose, the following two base models are estimated:
Base Model A: PETP = f (PEST, PDET, TL, CD, CTR, PROD, PRI, VAR, VAROBS) 
Base Model B: PETP = f (Model A, plus INDIA, NAMR, AFRI, LATIN, ESTE) 
The dependent variable in the meta-regressions is the PETP measurement reported in the studies included in the data set. The independent methodological variables are: PEST, a dummy equal to one if the model is a parametric stochastic frontier, and zero otherwise; PDET, a dummy equal to one if the model is a parametric deterministic frontier, and zero otherwise, the omitted category being non-parametric deterministic studies; TL, a dummy equal to one if the TL functional form is used; CD, a dummy equal to one for the CD functional form Cobb-Douglas (CD) and the excluded category is other functional forms and non-parametric studies; CTR, a dummy equal to one if the data is cross-sectional, and zero if panel data; PROD, a dummy equal to one if the model is output-oriented, and zero if input-oriented; PRI, a dummy equal to one if a primal model is estimated, and zero for dual models; VAR, the number of explanatory variables; and VAROBS, the ratio between VAR and the number of observations used in a study.
In Base Model B, the following set of regional variables is incorporated: INDIA, which is a regional dummy variable equal to one if the study used data for that part of the world, and zero otherwise; NAMR, a dummy equal to one if the data comes from North America (United States and Canada), and zero otherwise; AFRI, a dummy equal to one if the study used data from Africa, and zero otherwise; LATIN, a dummy equal to one if the study used data from Latin America, and zero otherwise; and, ESTE, a dummy equal to one if the study used data from Eastern Europe, and zero otherwise. The omitted regions are Western Europe and Oceania.
Meta-studies often incorporate articles that include several observations, which gives rise to a potential lack of independence in the data because studies with a higher number of observations have more weight in the analysis (Anderson and Weitz, 1989; Van Den Bergh et al., 1997). Several econometric procedures have been proposed to deal with this issue. Phillips (1994) applied fixed effects, while Verlegh and Steenkamp (1999) used a two step process following a procedure suggested by Anderson and Weitz (1989). Another approach is to average the data according to some specified criteria (Espey et al., 1997; Verlegh and Steenkamp, 1999; Johnston et al., 2003; Hunter and Schmidt, 2004). Including a dummy variable to capture the study (fixed) effect to address the multi author problem (Anderson and Weitz, 1989) has been criticized by Verlegh and Steenkamp (1999), who argue that incorporating study dummies in a meta-regression model is likely to introduce severe multicollinearity. To avoid the collinearity problem, Anderson and Weitz (1989) suggest a two step procedure. First, the model without study dummies is estimated and the residuals from this step are used as the dependent variable in a second regression. In this second step, the study dummies are regressed on the residuals from the first step using a stepwise procedure. If the residuals are white noise then there are no study effects, and if not, then the selected dummies are introduced into the original model, which is re-estimated.
Another problem that arises when studies have multiple estimates, and thus the observations lack independence, is a possible bias in the standard errors of the meta-regression parameters, which would invalidate tests of hypotheses (Espey et al., 1997; Verlegh and Steenkamp, 1999; Johnston et al., 2003; Hunter and Schmidt, 2004). One option to mitigate this problem is to average multiple observations from a given study. This can be done in various ways (Hunter and Schmidt, 2004). In this paper, the presence of multiple PETP is due to the diversity of attributes used in the estimation of ET and all the main attributes are included in the base Models A and B. However, some attributes are incorporated in only a few models within a study and in such cases we average the respective ET measurements.
To deal with the various issues discussed above, three additional models (1, 2 and 3) are estimated for each base Model (A and B), yielding a total of eight estimated models: 1) Models with full fixed effects; 2) Models with selected fixed effects; and 3) Models with averaged multiple observations. Models with full fixed effects and with selected fixed effects include a set of dummy variables that are defined for each study that reports two or more PETP estimates. Each study dummy is equal to 1 for all the observations that belong to a given study, and zero otherwise. Models with full fixed effects include all study dummies available, while models with selected fixed effects include only the selected study dummies following the two step procedure suggested by Anderson and Weitz (1989), as previously detailed.
ET scores are bounded between zero and one; thus, the two-limit Tobit procedure should be used (Greene, 2003). However, the meta-analysis literature focusing on ET in the agricultural sector reports similar results for the Tobit and Ordinary Least Square (OLS) procedures. Another consideration articulated by Stanley and Jarrell (1989) is that meta-regression studies use different data sets, different sample sizes, and different independent variables, which suggest that the variances of the meta-regression coefficients may not be equal, which implies that meta-regression errors are likely to be heteroskedastic. Therefore, in the current study all meta-regressions are estimated using Whites heteroskedastic consistent covariance matrix estimation to correct the estimates for an unknown form of heteroskedasticity. This procedure is readily available in the Shazam Econometrics Software (Whistler et al., 2001) and has been used in other meta-analysis work (Johnston et al., 2003; Bravo-Ureta et al., 2007).
RESULTS AND DISCUSION
The literature search generated a total of 65 published papers which contain the type of information required for the present research. Because many of the papers report multiple ET estimates, the meta-dataset consists of a total of 329 observations. Table 1 presents an overview of all papers used in this assessment, including the authors, year of publication, country, and the PETP reported. In addition, all these papers are classified by the methodology implemented in the studies. To simplify the table, for studies that report more than one estimate using the same methodology, the average figures are included.
Table 2 presents the methodological features of the studies included in this research. As indicated, a total of 65 studies are included out of which 38 apply deterministic models and 33 stochastic models. It is important to mention that the total number of papers with stochastic and deterministic models (71) is larger than the reported number of papers (65) because in some studies both techniques are implemented. All studies combined yield a total of 329 observations given that, as already stated, some authors report multiple estimates. The data show a similar number of observations and studies that use deterministic (169 observations) and stochastic models (160 observations). The PETP for all deterministic models is 75.6% compared to 81.4% for all stochastic models and this mean difference is statistically significant at 5%. In addition, most of the studies rely on the translog (TL) functional form, are output-oriented and are mainly published in English (58 out of 65).
Table 2 also summarizes the PETP measurements according to the geographical region where the studies were conducted. Western Europe and Oceania have the largest number of observations (159 in 33 studies), followed by North America (89 in 19 studies), Eastern Europe (47 in four studies), Latin America (16 in five studies), Africa (10 in three studies) and India (eight in one study). The highest PETP, when stochastic and deterministic studies are combined, is for India (90.2%), while the lowest is for Eastern Europe (74.5%).
A preliminary analysis reveals that the two preferred options are the Selected Fixed Effects Model (Model EFS) that includes methodological variables, without geographical variables, and the Averaged Observations Model (Model OP) that incorporates both methodological and geographical variables. These two models are not nested, so no further formal statistical comparisons among them are undertaken. The parameters for both of theses models are included in Table 3 and a simple comparison of the number of significant parameters and adjusted R2 reveals that model EFS is clearly superior to model OP. Therefore, the following analysis of the results is based on model EFS. Additional information for all models can be obtained directly from the authors.
The variables PEST and PDET capture the effect of the methodology used to estimate the frontier on PETP estimates where the excluded category for this group of dummies is the non-parametric approach. Model EFS has a negative parameter for PEST while in Model OP it is positive, but in both cases it is non significant. Theoretically, a positive value is expected for the parameter for PEST, given that deterministic models assume that all deviations from the frontier represent inefficiency (Coelli et al., 2005). The estimated parameter for PDET suggests that parametric deterministic models yield lower PETPs than non-parametric models, which is valid in both models. This finding is also consistent with a priori expectations (Kumbhakar and Lovell, 2000). Thiam et al. (2001) found a negative and significant parameter for stochastic models compared to deterministic models in their research using 34 studies covering only developing countries. Bravo-Ureta et al. (2007) found a negative and significant parameter for both the parametric stochastic and deterministic models when compared with the non-parametric approach in their research using 167 studies on farming.
The TL and CD specifications are statistically significant in Model EFS, but not for Model OP. The CD and TL yield higher PETPs than other functional forms. These results suggest that the functional form has an unclear effect on PETP, which is consistent with what has been reported by Ahmad and Bravo-Ureta (1996), Resti (2000), and Bravo-Ureta et al. (2007), among others.
The parameter for CTR (Cross Sectional data) is positive and significant in Model EFS, which is consistent with the averages shown in Table 2, while the PROD parameter (orientation of the model) is negative. Thus, these findings suggest that frontier models using an output-oriented approach produce lower PETP estimates than models based on an input-oriented approach. Neither Thiam et al. (2001) nor Bravo-Ureta et al. (2007) include this variable in their meta-regressions.
Model EFS has a positive parameter for PRI, suggesting that the question of whether the model relies on a primal (PRI) or dual representation of the technology can have a significant effect on PETP. By contrast, Bravo-Ureta et al. (2007) found a non-significant effect for this variable.
The results indicate that the parameter for VAR (number of explanatory variables) is positive and significant and VARSIZE (ratio between the number of explanatory variables and the number of observations) is also positive but not significant. Thomas and Tauer (1994) reported an increase in the ET measurements in a non-parametric analysis when the number of variables is increased, which is consistent with the Bravo-Ureta et al. (2007) findings. In general and as would be expected, these results indicate a positive association between PETP and model dimensionality (Chavas et al., 2005).
The empirical and the conceptual literature contain mixed results and contradictory views concerning the virtues of the various methodologies that have been developed to measure technical efficiency. This paper organizes studies originating from an extensive body of literature that has been published in English and Spanish over the past few decades on dairy farm ET. A total of 65 studies that use frontier models report PETP measurements at the farm level, and all the variables required for the estimated models are included. These studies yielded 329 observations, given that some report several PETP estimates.
Eight alternative models were estimated and several tests indicate that two of them perform better than the rest and thus are selected for further analysis. These two models are the selected fixed effects (model EFS) and the averaged multiple observations (model OP). Further analysis of the performance of these two models indicates that the EFS model is superior to the OP model. Thus, the results confirm the importance of considering the effect of multiple observations in the estimation of a meta-regression analysis.
The main results of the EFS model suggest that non-parametric deterministic models generate higher PETP estimates than the parametric cases (stochastic and deterministic frontier models). Within the parametric studies, the deterministic approach produces lower ET figures than the stochastic approach. The effect of functional form on ET is significant and the CD and TL forms yield higher average ET than all other functions. Frontier models based on cross-sectional data produce higher estimates than those based on panel data. In addition, the orientation of the study (input or output) has a significant effect, with a higher PETP measurement being found for the input-oriented cases. The primal approach implies a higher ET estimate than the dual analysis. Finally, the dimensionality of the model is relevant and when more variables are included in the model, a higher PETP value is reported.
Ahmad, M., and B.E. Bravo-Ureta. 1996. Technical efficiency measures for dairy farms using panel data: A comparison of alternative model specifications. J. Prod. Anal. 7:399-415. [ Links ]
Anderson, E., and B. Weitz. 1989. Determinants of continuity in conventional industrial channel dyads. Marketing Sci. 8:310-323. [ Links ]
Battese, G.E. 1992. Frontier functions and technical efficiency: A survey of empirical applications in agricultural economics. Agric. Econ. 7:185-208. [ Links ]
Blayney, D.P., and M.J. Gehlhar. 2005. U.S. Dairy at a new crossroads in a global setting. Amber Waves 3:1-6. [ Links ]
Bravo-Ureta, B.E., and A.E. Pinheiro. 1993. Efficiency analysis of developing country agriculture: A review of the frontier function literature. Agric. Resour. Econ. Rev. 22:88-101. [ Links ]
Bravo-Ureta, B.E., and L. Rieger. 1991. Dairy farm efficiency measurement using stochastic frontiers and neoclassical duality. Am. J. Agric. Econ. 73:421-428. [ Links ]
Bravo-Ureta, B.E., D. Solís, V.H. Moreira, J.F. Maripani, A. Thiam, and T.E. Rivas. 2007. Technical efficiency in farming: A meta-regression analysis. J. Prod. Anal. 27:57-72. [ Links ]
Coelli, T.J., D.S.P. Rao, C.J. O'Donnell, and G.E. Battese. 2005. An introduction to efficiency and productivity analysis. 349 p. 2nd ed. Springer, New York, USA. [ Links ]
Chavas, J.P., R. Petrie, and M. Roth. 2005. Farm household production efficiency: Evidence from the gambia. Am. J. Agr. Econ. 87:160-179. [ Links ]
Dartt, B.A., J.W. Lloyd, B.R. Radke, J.R. Black, and J.B. Kaneene. 1999. A comparison of profitability and economic efficiencies between management-intensive grazing and conventionally managed dairies in Michigan. J. Dairy Sci. 82:2412-2420. [ Links ]
Espey, M., J.A. Espey, and W. Shaw. 1997. Price elasticity of residential demand for water: A meta-analysis. Water Resour. Res. 33:1369-1374. [ Links ]
Evans, L., A. Grimes, B. Wilkinson, and D. Teece. 1996. Economic reform in New Zealand 1984-95: The pursuit of efficiency. J. Econ. Lit. 34:1856-1902. [ Links ]
Farrell, M.J. 1957. The measurement of productive efficiency. J. R. Stat. Soc. 120:253-290. [ Links ]
Greene, W.H. 2003. Econometric analysis. 1026 p. 5th ed. Pearson Education Pte. Ltd., Delhi, India. [ Links ]
Hunter, J.E., and F.L. Schmidt. 2004. Methods of meta-analysis: Correcting error and bias in research findings. 582 p. 2nd ed. Sage Publications, Thousand Oaks, California, USA. [ Links ]
Johnston, R.J., E.Y. Besedin, and R.F. Wardwell. 2003. Modeling relationships between use and nonuse values for surface water quality: A meta-analysis. Water Resour. Res. 39:1363-1372. [ Links ]
Kalirajan, K.P. 1984. Farm-specific technical efficiencies and development policies. J. Econ. Stud. 11:3-13. [ Links ]
Kumbhakar, S.C., and C.A.K. Lovell. 2000. Stochastic frontier analysis. 348 p. Cambridge University Press, New York, USA. [ Links ]
Lawson, L.G., J. Bruun, T.J. Coelli, J.F. Agger, and M. Lund. 2004. Relationships of efficiency to reproductive disorders in Danish milk production: A stochastic frontier analysis. J. Dairy Sci. 87:212-224. [ Links ]
Paul, C.J.M., W.E. Johnston, and G.A.G. Frengley. 2000. Efficiency in New Zealand sheep and beef farming: The impacts of regulatory reform. Rev. Econ. Stat. 82:325-337. [ Links ]
Phillips, J.M. 1994. Farmer education and farmer efficiency: A meta-analysis. Econ. Dev. Cult. Change 43:149-165. [ Links ]
Pinstrup-Andersen, P. 2002. Food and agricultural policy for a globalizing world: Preparing for the future. Am. J. Agric. Econ. 84:1201-1214. [ Links ]
Resti, A. 2000. Efficiency measurement for multi-product industries: A comparison of classic and recent techniques based on simulated data. Eur. J. Oper. Res. 121:559-578. [ Links ]
Rivas, T.E. 2003. Dairy farm efficiency and the analysis of milk production growth: Evidence from vermont. 162 p. Ph.D. Dissertation. University of Connecticut, Storrs, Connecticut, USA. [ Links ]
Russell, N.P., and T. Young. 1983. Frontier production functions and the measurement of technical efficiency. J. Agric. Econ. 34:139-150. [ Links ]
Ruttan, V.W. 2002. Productivity growth in world agriculture: Sources and constraints. J. Econ. Perspect. 16:161-184. [ Links ]
Sandrey, R.A., and G.M. Scobie. 1994. Changing international competitiveness and trade: Recent experience in New Zealand agriculture. Am. J. Agric. Econ. 76:1041-1046. [ Links ]
Stanley, T.D., and S.B. Jarrell. 1989. Meta-regression analysis: A quantitative method of' literature surveys. J. Econ. Surv. 3:161-170. [ Links ]
Thiam, A., B.E. Bravo-Ureta, and T.E. Rivas. 2001. Technical efficiency in developing country agriculture: A meta-analysis. Agric. Econ. 25:235-243. [ Links ]
Thomas, A.C., and L.W. Tauer. 1994. Linear input aggregation bias in nonparametric technical efficiency measurement. Can. J. Agric. Econ. 42:77-86. [ Links ]
van den Bergh, J.C.J.M., K.J. Button, P. Nijkamp, and G.C. Pepping. 1997. Meta-analysis in environmental economics. 240 p. Kluwer Academic Publishers, Netherlands. [ Links ]
Verlegh, P.W.J., and J.-B.E.M. Steenkamp. 1999. A review and meta-analysis of country-of-origin research. J. of Econ. Psych. 20:521-546. [ Links ]
Whistler, D., K.J. White, S.D. Wong, and D. Bates. 2001. Shazam user's reference manual version 9. 558 p. 2nd ed. Quebecor World, Quebec, Canada. [ Links ]