SciELO - Scientific Electronic Library Online

 
vol.25 número3Efecto de la secuencia anaeróbica-óxica-anóxica (AOA) en la eliminación de materia orgánica, fósforo y nitrógeno en un SBR modificado a escala de laboratorioAnálisis del rendimiento del torneado utilizando coeficiente de vida útil en relación al volumen de metal cortado índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Ingeniare. Revista chilena de ingeniería

versão On-line ISSN 0718-3305

Resumo

MOLINA, Julio Cesar; RODRIGUES DE OLIVEIRA, Diego; NEGRELI, Murilo  e  FRIEDMANN PALLAROLAS, Ernesto Abel Fernando. Embedment strength of steel dowel in wood specimens according to ABNT NBR 7190:1997 and ASTM D5764: 2007 Standards. Ingeniare. Rev. chil. ing. [online]. 2017, vol.25, n.3, pp.492-500. ISSN 0718-3305.  http://dx.doi.org/10.4067/S0718-33052017000300492.

The aim of this work was the study of embedment strength of dowels in reforested wood pieces. Analytical and experimental approaches were considered. Specimens for testing were made of Pinus elliottii (C30) and Eucalyptus saligna (C50) wood with steel rods with diameter of 6.35 mm (1/4"). The tests were performed according to the recommendations of ABNT NBR 7190:1997 and ASTM D5764:2007 Standards with subsequent comparison between the analytical and experimental results for embedment strength in the parallel and perpendicular directions to the grain. The results showed that the analytical and experimental values for embedment strength according to American Standard presented closer to each other compared to the Brazilian Standard in this case. Moreover, the American Standard recommended test specimen dimensions, which facilitate the manufacture, especially in the direction perpendicular the to wood fibers.

Palavras-chave : Standardization; experimental tests; analytical models.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )