SciELO - Scientific Electronic Library Online

 
vol.25 número2Vida y productividad de la herramienta de corte en el fresado de acabado del acero endurecido AISI D6Novedoso generador de reglas para la detección de intrusos basado en minería de subgrafo frecuentes índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Ingeniare. Revista chilena de ingeniería

versão On-line ISSN 0718-3305

Resumo

OBERG, Matheus B.A.M.  e  ANFLOR, Carla T.M.. Numerical and experimental analysis of a RVE condition for heterogeneous materials using BEM and thermal images. Ingeniare. Rev. chil. ing. [online]. 2017, vol.25, n.2, pp.217-225. ISSN 0718-3305.  http://dx.doi.org/10.4067/S0718-33052017000200217.

This work focuses on the numerical and experimental study of the effective thermal conductivity in materials with heterogeneous composition. The numerical analysis relies in the Boundary Element method (BEM) formulation assisted by the sub-regions technique to simulate a two-dimensional square domain, with randomly distributed material inclusions. The boundary conditions are set to achieve a unidirectional heat flux condition. The Average Field Theory (AFT) is applied to determinate the representative volume element (RVE) condition for the studied cases. Finally, the effective heat conduction coefficient is obtained from the defined RVE's. To verify the obtained numerical results, it is proposed an experimental procedure based on thermal images. The experimental assembly replicates the unidirectional heat flux condition over a steel plate. The experimental effective thermal conductivity is obtained from the analysis of the resultant temperature field on the surface of the plate taken by an infrared camera. The comparison between the numerical and experimental results showed a 3% difference between both results, pointing out for the successfulness of the proposed methodology.

Palavras-chave : Boundary element method; heterogeneous materials; representative volume element; thermal images.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )