SciELO - Scientific Electronic Library Online

 
vol.16 número3Problemas Numéricos en la Determinación de la Tensión de Cierre en Fatiga Mediante Elementos FinitosPrograma Interactivo para el Modelado y Determinación de las Características Dinámicas de Rotores índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Información tecnológica

versión On-line ISSN 0718-0764

Resumen

RODRIGUEZ, J.M.; COLIN, J.; PORCAYO, J.  y  LOPEZ, M.I.. Evaluation of the Velocities Required for the Deposition of FeSi and MoS2 on SAE 4140 and AISI 304 Steels by Triboadhesion. Inf. tecnol. [online]. 2005, vol.16, n.3, pp. 21-28. ISSN 0718-0764.  http://dx.doi.org/10.4067/S0718-07642005000300004.

In this work a theoretical and experimental evaluation of the velocities required to deposit FeSi and MoS2 on SAE 4140 and AISI 304 steels is presented. To achieve this goal, the friction factor between the cotton mop and the base material was determined. The deposition process by triboadhesion is caused by the heat generated by friction between the cotton mop and the base material. During the friction, the contact between these two elements generates high instant temperatures. In the study, it was experimentally demonstrated the deposition of the material, using the tangential velocity obtained from a theoretical analysis.

Palabras clave : triboadhesion; heat generation; friction; deposition; tribology.

        · resumen en Español     · texto en Español