SciELO - Scientific Electronic Library Online

 
vol.15 número5Interpretación Geométrica de Piezas a través de Elementos Característicos de MecanizadoComparación de Representaciones Tiempo-Frecuencia Aplicadas en la Simulación y Análisis de Fallas en Sistemas Engranados índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Información tecnológica

versión On-line ISSN 0718-0764

Resumen

SALGADO, D.R.  y  GONZALEZ, A.G.. Design of a Mechanical Transmission for Differential Indexing. Inf. tecnol. [online]. 2004, vol.15, n.5, pp. 9-16. ISSN 0718-0764.  http://dx.doi.org/10.4067/S0718-07642004000500002.

The objective of the present work is to design a mechanical transmission that, included in a differential dividing-head, allows division of a piece into a prime number of equal divisions. For this purpose, the functioning of a differential divider was analyzed first. Then, the required transmission ratios were calculated to obtain all divisions up to 307. An analysis of the transmission ratios demonstrated that the number of stages of the mechanical transmission can be reduced significantly. This result allowed the design of a more compact and mechanically less complex transmission system. Finally, the design of a several-stage transmission is proposed, among which are included two epicyclical stages in series for further reducing the final dimensions of the set.

Palabras llave : differential indexing; mechanical transmission; epicyclical transmission; transmission design.

        · resumen en Español     · texto en Español