SciELO - Scientific Electronic Library Online

 
vol.15 número2Análisis del Efecto de la Presión en Destilación Flash con Soluciones Múltiples Aplicando Cálculos de Equilibrio Instantáneo y Equilibrio entre Fases índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Información tecnológica

versión On-line ISSN 0718-0764

Resumen

DAVILA, P.A.  y  ORTIZ, I.. Simulation of Production Process for Ethyl Tert-Butyl Ether (ETBE): Influence of the Ethanol/Isobutene Ratio. Inf. tecnol. [online]. 2004, vol.15, n.2, pp. 3-6. ISSN 0718-0764.  http://dx.doi.org/10.4067/S0718-07642004000200001.

This work describes a methodology which combines conceptual design and process simulation to determine the influence of the molar feed ratio of ethanol/isobutene on tert-butyl ethyl ether selectivity. The conceptual design of distillation columns was based on the residue curve map and it allowed determination of feasible separation schemes and maximization of the concentration of ether in the stream bottom of the distillation column. Simulation of the process has allowed determining the operating variables and design parameters for the reactors and the distillation column. It is concluded that this methodology significantly reduces the time required to obtain results with a process simulator

Palabras clave : petrochemical distillation; process simulation; ethyl tert-butyl ether; residue curves.

        · resumen en Español     · texto en Español