Underlying Dimensions and Organizational Values in Organizational Learning:Strategy for Capacity Building in Developing Countries

The idea that organizational learning is closely linked to innovation became firmly established by the end of the nineties (Argyris and Schön, 1978; Watkins and Marsick, 1993; Nonaka and Takeuchi, 1995), however, very little research in these topics is done in developing countries. Therefore, the objective of this article is to expose the underlying dimensions as well as the organizational values that should characterize an organizational learning process, as a strategy for technological capacities construction in small and medium size firms. Consequently, through analytical-synthetic methodology including a case study analysis, this article evidence those determinants characteristics of an organizational learning approach to promote the planning of technological learning processes for catching up in order for developing countries to get into the path of innovation.


Introduction:
During the last decades it has been evident the crucial role that innovation play in the international market competition, which is based mainly on technological innovation, Therefore, it follows that scientific and technological capacity determines country export performance (Drucker, 1993;Reich, 1991;Castells & Laserna, 1989).Thus, countries which innovation systems are not strong enough and consequently have not been traditionally great producers of technology or high technology products do not have any other option that to import both technology and high technology products.As a result, countries that need to import high technology products (both in capital goods and in consumer goods) see their balance of trade deteriorated in the same proportion that they have been forced to import and are unable to export high value added products.These conditions undermine the capacity of these countries to industrialize and develop.It is within this context that organizational learning becomes a key process, which adoption is imperative to plan a technological learning process and gradually reach innovation.According to several experts, scientific research in these topics has been concentrated mainly in advanced countries (Argyris and Schön, 1978;Von Hippel, 1988;Dodgson, 1993;Utterback, 1994;Nonaka and Takeuchi, 1995).The research in organizational learning and capacity building for technological development and innovation has received very little attention in developing countries.This is even though the extraordinary jump observed in some Asiatic countries, expressed in technological, educational and economic performance in which basis and foundation is found and organizational learning process; only many diplomatic visits and study trips to these nations, mainly by politicians and policy makers, but very little research in these topics has been done in countries trying to industrialize and develop, at least this is the case of Mexico.This is despite of the imperative need of theoretical models that capture organizational learning and technological advance in these countries as an important prerequisite to understand the dynamic process of capability building and inform policy makers for the design of suitable strategies for industrial advance.
Thereafter, the objective of this article is to expose the underlying dimensions as well as the organizational values affecting an organization's willingness to create and use said knowledge, characterized by the literature as learning orientation of organizational learning as a strategy for technological capacities construction.
Consequently, based on theoretical and empirical knowledge, including a case study analysis, this paper highlight the relevance of organizational learning for technological capacities construction and evidence the underlying dimensions, values and conditions that should be part of a suitable tingent upon the health institution's capacity to learn and transfer knowledge and to apply such knowledge in high quality decision-making.Also, McDonald (2002) have addressed in the nonprofit sector the mediating role of innovation between organizational learning and performance.For the same area of analysis in the health services McDonald (2007) feels that the goals which an organization aims to achieve and which are shared by all the employees will help new ideas to emerge and be assessed.
Although research in organizational learning has been concentrated in developed countries and it is scanty in developing countries, there are some studies in developing and new industrialized countries that also have been able to demonstrate how organizational learning contributes to build innovation capability and how this determines firm performance.Among these studies Salim, and Sulaiman, (2011), investigate the effect of organizational learning on innovation as well as the impact of innovation on company performance in the small and medium size firms of Information, Communication and Telecommunications Industry (ICT) in Malaysia.By analyzing 320 small and medium size enterprises operating in the ICT industry these authors found evidence that organizational learning contributes to innovation capability, and that innovation is positively related to firm performance.et al., (2007) identify five underlying dimensions of organizational learning capability: experimentation, risk taking, interaction with the external environment, dialogue and participative decision making as the most underlined facilitating factors for innovation in the literature.Among the arguments and evidence for the positive relationship to innovation of each factor are the following:

Experimentation and Innovation
Several authors have argued that management needs to encourage and support the freedom to conduct experiment with new work methods and innovative process (Senge, 1990;Garvin, 1993;Mcgill, Slocum and Lei 1992).Thomke (1998) contends that to ensure that technological implementation works, it often requires to do experimentation, using trial and error to find the solution.Lately, the same author declare that experimentation lies at the heart of every company's ability to innovate, and that new technologies reduce the cost and time of experimentation, allowing companies to be more innovative (Thomke, 2001).Beerkens (2004) found that companies that experiment novel technologies are better positioned to have a higher rate of innovation than firms that invest all their efforts in exploiting the prints, etc that document the organization´s processes, instructions and expert advice.
The idea that organizational learning is closely linked to innovation became firmly established at the end of the nineties (Argyris and Schön, 1978;Watkins and Marsick, 1993;Nonaka and Takeuchi, 1995).Several authors have established that to meet the challenge of innovation, numerous organizations have opted to introduce the concept of organizational learning (Sinkula, 1994;Slater and Narver, 1995), which according to Baker andSinkula (1999a), Ismail, (2005), Thomas and Alien, (2006), among others, it is a factor that enable organizations to respond in an expeditious way to market opportunities by helping to create the optimal innovation environment.Baker andSinkula (1999b and2002) have firmly demonstrated that organizations need organizational learning for the successful launch of new products or services into the market to meet consumer requirements and thus achieve enhanced performance and sustainable competitive advantage.
In sum, many authors coincide as to the positive link between organizational learning and innovation, among many others Hurley and Hult, 1998;Weerd-Nederhof et al., 2002;Ismail, 2005; even for nonprofits organizations some works have addressed the organizational learning -innovation connection.Additionally, Burt and Taylor (2003) as well as Voss et al., (2006) have examined the relation between innovation and performance, while others have been assessing the impact of organizational learning on performance (Grieves and Mathews, 1997;Zeilstra, 2003;Barrett et al., 2005).
With regard to the impact of organizational learning on performance, empirical works linking organizational learning to performance in for-profits organizations have traditionally established that greater the level of organizational learning better the performance, particularly in unstable settings involving strong competition.Specifically, it is posited that organizational learning might lead to a change in values (Argyris andSchön, 1978), skills (Fiol andLyles, 1985), systems and structures (Levitt and March, 1988), innovation and competitiveness (Nason, 1994), financial performance (Lei et al., 1999;Pérez et al., 2005) and even employee satisfaction (Bontis et al., 2002).
For nonprofit organizations, in the area of public administration, Yim-Teo (2002) points out the socio-cultural and technical factors as two types of factors involved in organizational change.The findings from his study demonstrate that the socio-cultural aspects of change assume greater importance in environments in which learning is less apparent.In contrast, technical innovations are more in evidence where learning is greater.Studying the health service sector, Berta et al., (2005) state that adopting innovation is con-

Dialogue and Innovation
Most scholars and practitioners of organizational learning conceive the process of dialogue as to provide an avenue for communication and collaborative learning within and between groups and teams (Isaacs, 1993;Schein, 1993).In agreement to that, Gear et al., (2003) sustain that in organizational studies, dialogue has become important as an aspect of understanding the difficulties and possibilities of learning and change.Supporting these statements, Balthasar et al., (2000) found that successful technological innovation is positively influenced by individuals communication.Other studies have conclude that the process of inter-functional coordination promotes communication, collaboration, cohesiveness, trust and commitment among different functional areas (Auh and Menguc, 2005) and the extent of product innovation ( Zhang and Yanling, 2010).Frederick (2005) stresses that development of new product is a complex process requiring cross-functional involvement from beginning through the end, in other words, throughout the process.Song and Parry (1992) consider the integration level as a critical determinant of new product performance.Thus, the role of dialogue among organizational members can produce better understanding by sharing meaning on related issues and speeding in sharing information.

Participative Decision Making and Innovation
The decision making process plays an important role in the success of product innovation process (Kok and Creemers, 2008).Moreover, participative decision making increases commitment and involvement, but also has a positive impact in innovation (Damanpour, 1991).Brown (1979) has recommended that when a firm is experiencing a major technological change, the use of participative decision making is the main priority mechanism.Wall and Lischeron (1977) explain that the increase in participation during decision making will result in less resistance to change and better possibility for adoption of new technology.Bahrami and Evans (1987) have found that successful high technology firms practice decentralized decision-making and high degree of participation by line managers in decision-making when dealing with changes in the environment.Furthermore, according to West and Anderson (1996) the ability to participate in decision making is a key process in enhancing innovation.Therefore, Ahmed Fadzil, (2001) concludes that participative decision making is the most essential factor to favor technological innovation.
Using these five underlying dimensions of organizational learning proposed by Chivas, et al., (2007), briefly described above, Mat and Che Razak (2011) explore the relationship between organizational learning capability and their impact on success of technological product innovation implementa-existing familiar technologies.Precipe (2000) explains that experimentation allows to understand technological failure and to gain knowledge resulted from failure will be helpful for subsequent technology or product development.Thus, organizations can accelerate their innovations in effective way especially in new technology through experimenting new technology.

Risk Taking and Innovation
Several authors have conceptualized Risk-Taking as the organization' s enthusiasm to break away from normal path and venture into unknown territory (Venkatraman, 1989;Wiklund and Shepherd, 2003).Liles (1981) defines risk as the probability of an unconstructive result occurring from various courses of actions.Kouzes and Posner (1987) argue that learning from successes and mistakes resulted from risk taking will lead to increasing business opportunities.Saleh and Wang (1993) showed that innovative companies are more engaged in risk taking compare to less innovative companies.Peter and Waterman (1982) suggest that companies that are able to manage risk taking properly in their industrial context will achieve excellent results.But in addition, Hurley and Hult (1998) argue that Employees need support and collaboration among themselves to reduce fear and gain openness which encourages new risk taking.The willingness to take risk or risk taking will open great opportunity to firms in implementing technological innovations.

Interaction with External Environment and Innovation
External environment demands organization to be more cautious.The current trend in innovative firm which previously depended on internal R and D, is highly working with external sources for the purpose of generating new product concept and building technology for product development (Chesbrough 2003). March, (1991) have argued that dependent on other sources of experience is important for firm with new product to successfully explore new ways to compete.Cyert and March (1963) contend that an organization needs to deal with external shocks, in turn they must adapt and learn to cope with that situation during their whole life.Varis and Littunen (2010) showed that external sources of information are positively associated with the introduction of novel product innovations in firms.It has been demonstrated that organizations need to establish relationships with external entities including customers, competitors, universities, or government agencies etc.Such collaboration will bring benefits to the firms including the latest changes or developments which affect firms.
ing between departments for any improved integral concept of one enterprise.
Using these four organizational values Chiou, and Chen (2012) investigate relationships among learning orientation, innovation capital and firm performance in Taiwan's Information, Telecommunications and Electronic industry.By using Structural Equation Modeling (SEM) and conceptualizing financial performance as measured return on assets, return on investments and profitability, these authors analyzed a sample of 317 listed companies from this industry.Chiou and Chen's study demonstrates that three out of the four organizational values of learning orientation defined above such as open-mindedness, shared vision and intra-organizational knowledge sharing except commitment to learning, have a positive effect on innovation capital; understanding Innovation capital as the capability to create products, services or processes possessed by an enterprise which includes explicit intelligent properties (Bass and Van Buren, 1999) or implicit R&D abilities such as internal research and development (Edvisson and Malone, 1997).In addition to that, these authors also found that the innovation capital has a positive effect on firm performance.In other words, as the source of innovation capital, having a learning orientation within firms, it is positively related to firm performance.Also, Garrido and Camarero (2010) analyzed the relationship between learning orientation, innovation and performance for the case of 386 British, French and Spanish museums.Concurring with the Iiterature which links learning orientation to organizational performance, these authors found that learning orientation is reflected in enhanced financial and social performance.Their study confirms that learning orientation determines the implementation of organizational innovations although the effect is noticeably higher for large museums than for small ones.Thus, the influence of learning orientation on technological innovation, is also confirmed.This study confirms that organizational innovation affects mainly technological innovation and, to a lesser extent, product innovation.As regards the impact of innovation on financial performance, the findings of these authors show significant differences depending on the size of the museum.However, they mention that while technological innovation does have a positive impact on financial performance for all kinds of museum, organizational innovation only affects performance in the case of small museums, whereas product innovation only influences financial performance in large museums.
Lately other scholars have been exploring the link between learning orientation and innovation ( Yim-Teo, 2002;Berta et al.., 2005;McDonnald, 2007).In the area of public administration, Yim-Teo (2002) points out to the socio-cultural and technical factors as two types of factors involved in tion.To analyze this relationship they design a cross-sectional study that involves a correlational empirical methodology for the purpose of testing the relationship between the independent, moderating and dependent variables.They used self administered questionnaires and received 115 responses from electrical and electronics (E&E) firms in Malaysia.These authors demonstrate that there is a significant relationship between three of the five underlying dimensions proposed by Chivas, et al., (2007), the significant dimensions on success of technological product innovation and implementation are: participative decision making, interaction with external environment and risk taking.
In addition to that, Nonaka (1994) and Nonaka &Takeuchi (1995) have identified Leadership and creative chaos as two organizational factors affecting formal and informal processes and structures that facilitate organizational learning, and definitely confirm that leadership is strongly related to risk taking.

Learning Orientation and Innovation
According to Nevis et al., (1995) learning orientation determines the way organizations acquire, share and utilize knowledge.It might emphasize knowledge source, productprocess focus, documentation mode, dissemination mode, learning focus, value-chain focus, or skill development focus.Sinkula et al., (1997), advance the concept of learning orientation and defines it as a series of organizational values affecting an organization's willingness to create and use said knowledge.These organizational values that conform the learning orientation concept are considered as an indirect measure of organizational learning.These organizational values are according to Sinkula et al : commitment to learn, open mind and shared vision.They define these values as follows: commitment to learn as closely linked to a managerial commitment to support a culture which promotes organizational learning as one of its core values.An open mind involves questioning the preconceived ideas or assumptions that shape the acts of the organization's members, thus enabling the incorporation of new ideas and points of view and adding life-long learning.This will in turn further and improve individual knowledge, and help create a shared vision or common notion of what the organization should be in the medium and long term.In other words, the board shares its perception of the organization's future with all the junior levels (1997).However, other authors have pointed out a fourth value to this concept of learning orientation, this is: intra-organizational knowledge sharing, advanced by Calantone et al., (2002) and conceived as the various types of information accumulated through knowledge learned by or spreading across different departments that will be advantageous to experiences and lessons shared by all units and saved in an organization's memories or mutual understand-in technological, educational and economic performance in Korea, and therefore it is a suitable case to be analyzed in the following section.

II. Case Study Analysis
The Korean Technological Learning Process According to Kim's description (1998) the Korean technological learning process for catching up exhibits a learning orientation characterized by different and subsequent learning focus such as duplicative imitation, creative imitation and innovation.Beginning from the assimilation of assembly operations, all these four subsequent phases were fed by the assimilation of foreign technology.Therefore, at the heart of the Korean catching up process could be identified an organizational learning process, enriched by national innovation systems' interactions, particularly with MNCs through which Korean firms engage in assembly operations.This is the case of Hyundai, Samsung and more than two hundred firms in different industries-not just electronics (Kim, 1980), but also automobiles (Kim, 1998), semiconductors (Kim, 1997), shipbuilding (Amsdem, 1989;Kim, 1985), iron (Amsdem, 1989;Amsdem and Kim, 1985), and machinery (Amsdem and Kim, 1986).Firms in all these different industries followed a similar expeditious learning pattern for catching up based on a process of organizational learning.Using the case of Hyundai, as described by Kim (1998), the following section depicts this technological learning process for catching up in its subsequent phases and identifies the underlying dimensions and values, which important role in organizational learning is being analysed here.
Kim analyzes very closely and reports how the first three subsequent learning stages were based and achieved through learning by doing and learning by using foreign packaged and unpackaged technology, while the innovation stage was achieved through learning by research, after the company have become proficient in the three previous phases.
Hyundai's technological learning process shows how it was nourished constantly and permanently through its interactions with international innovation systems at all stages of development achieved.Hyundai began by assimilating mature technologies from developed countries, especially through contract agreements with MNCs.Without previous experience in automobile production, Hyundai assimilate and improve packaged and unpackaged technology through learning by doing and learning by using, the mastering of these capacities enabled Hyundai to challenge more advanced technologies and progressively be able to learn by research and attain innovation.Hyundai develops its technological learning process mainly going through the mastering of more simple to more sophisticated capabilities, such as, acquisitive organizational change.The findings from his study demonstrate that the socio-cultural aspects of change assume greater importance in environments in which learning is less apparent.In contrast, technical innovations are more in evidence where learning is greater.Studying the health service sector, Berta et al., (2005) state that adopting innovation is contingent upon the health institution's capacity to learn and transfer knowledge and to apply such knowledge in high quality decision-making.In the nonprofit sector McDonald (2002) have addressed the mediating role of innovation between organizational learning and performance.In the health services McDonald (2007) found that the goals which an organization aims to achieve and which are shared by all the employees will help new ideas to emerge and be assessed.
In services marketing literature, several works demonstrate that any technological improvement needs an organizational adaptation.Damanpour and Evan (1984) explain this point with the case of a bank that offers a new service requiring a new set of administrative mechanisms to evaluate and control its performance.They show that administrative innovations oblige technical innovations.Also Han et al., (1998), using banking industry data, reveal a synergistic relationship between technical and administrative innovations.
In Mexico there are a few studies about technological learning process.Among them could be cited the study of Alonso, Carrillo and Contreras (2002), which describe and analyze how some firms from Asia and United States, established in Tijuana have become more competitive, as a result of technological learning process by adopting flexible productive and organizational strategies.Contreras and Munguía (2007) analyze the evolution of the industrialization model of 'maquiladoras' emphasizing the technological learning process and industrialization in the north part of the country, but more than a study about an organizational learning process, it focus on the description of the evolution of industrialization in that part of the country.Other authors such as Contreras and Carrillo (2011) have analyzed if Multinational Corporations (MNC) established in Mexico have promoted technological learning in the suppliers network, however their study have been no conclusive.
Moreover, the Korean organizational learning process for capacity building described by Kim's study (1998) is a living case confirming the highly important role played by each one of the underlying dimensions and learning orientation values analyzed above.Most of the five underlying dimensions of organizational learning as well as the four organizational values that characterize learning orientation analyzed in the literature, just depicted, and pointed out as factors highly promoting innovation could be identified in the Korean organizational learning process.This Korean process represents an extraordinary jump expressed clear goals, which intensify the efforts among organizational members to expedite learning, elevating the absorptive capacity of the organization, and therefore, turning crisis into opportunities.The second, materialized by working sixteen hours a day, seven days per week.These organizational strategies were present in every of the four stages of the Korean organizational learning process reported here, which sometimes were exacerbated by externally evoked crisis and therefore increasing even further the intensity of efforts to convert explicit into tacit knowledge; to translate tacit to explicit knowledge; and also for the translation of tacit to tacit knowledge (socialization) as well as to the translation of explicit knowledge to explicit knowledge (combination of discrete pieces of knowledge into a new whole, according to Nonaka, 1994 andNonaka andTakeuchi, 1995).
The externally evoked crisis were mainly originated in government demands, market turbulence, and technological barriers.For example, during the second stage of the process Hyundai faced a major crises coming from the government radical demand to shift from assembly production of foreign cars to the development of locally designed Korean cars.The crisis from the market was faced during the third stage due to rising gasoline prices and falling car sales that demand Hyundai to manufacture a car to meet the most stringent safety and environmental requirements to compete in the North American market.The technological barrier crisis, faced at the fourth stage of its learning process, provide the conditions and accelerated Hyundai's process of learning by research to achieve innovation.This external crisis of technological nature consisted of a technology barrier imposed by technology providers, which prompted Hyundai to reach innovation capacity through learning by research relying on its international research and development network (R&D) that it had begun to build step by step since 1978, but it was not until 1984 when it began to materialize with the establishment of the Advanced Engineering and Research Institute, created to develop its own engines and transmissions (Kim, 1998).
The learning process examined here shows that prior knowledge base developed and registered during and at the end of each phase increased the absorptive capacity of Hyundai providing a platform for the succeeding phase while representing an increase in its absorptive capacity.That is to say, that the mastery of operative, duplicative and creative imitation capacities served as prior knowledge base to reach innovation capacity at Hyundai.
Going beyond the organization boundary, it is absolutely important to point out that in addition to the development of the organizational learning process as a whole within the organization boundary, there is evidence of systemic planning efforts beyond that frontier.These are expressed in the capability, operative capability, adaptive capability and finally, innovative capability; capacities which in Kim's conceptual framework were described as the mastering of operative capacity, duplicative imitation, creative imitation and innovation, which could be equivalent and also represent stages going from the simpler to the more complex or from minor to major level of understanding in the technologies it was dealing with as Dahlman & Westphal (1983, p.7) as well as Shiowattana (1991) classify them.Therefore, the depiction of the technological learning process followed by Hyundai as described by Kim (1998) shows how first, it acquires operative capability, then, on the basis of the former it acquires duplicative imitation capacity, once the imitation capacity was mastered, its absorptive capacity and prior knowledge base developed provided a platform for the third stage, during which it gains creative imitation capacity, and finally all that prior knowledge base developed provided the platform to learn by research and achieve innovative capacity.All of those learning stages were based on an organizational learning process, which was structured by forming taskforce groups with team members from Hyundai' several divisions according to background and specialties required, as well as from outside auto producers with more experience in automobile production.
These taskforces teams began the first phase in the organizational learning process described here: assimilation of assembly operations in 1967 without any experience in automobile production ( Kim, 1998).Subsequently these teams were through the second, third and fourth phase of the organizational learning process.During the process of acquiring the first three capacities Hyundai increases its absorptive capacity to assimilate technology mainly through learning by doing and learning by using relying on different sources of explicit knowledge provided by technology suppliers such as technical specifications, production manuals, blue prints, received with the acquisition of packaged and unpackaged technology, but also increasingly by research on international literature reviews.
The company was able to convert this explicit knowledge gained into tacit knowledge by organizing study groups by task and objective and promoting an expeditious organizational learning process with the help of specific training and specific visit tours offered by technology providers, or by foreign experts with previous work experience in multinationals car producers, and expatriates with doctoral degrees earned at United States Universities.This expeditious organizational learning process was enhanced with organizational strategies fed by all the organizational values and underlying dimensions pointed out by the literature discussed here from which outstands sociocultural factors such as proactively constructed crisis and intensity of efforts.The first, were primarily team crises with focus and this organizational learning process which in turn supports the results pointed out by empirical research depicted in the first section.
Experimentation and Risk Taking, these two dimension have characterized all the four phases of Hyundai's organizational learning process.Along the first phase, it could be appreciated the experimentation and risk taking in trying to assimilate and dominate the assembly operations in car production through the process of learning by doing and learning by using, without previous experience in car production.In the second phase the experimentation and risk taking is materialized in trying to produce the first Korean car through the process of learning by doing and learning by using achieving imitation by duplication.This is also the case of the third and fourth phase, when Hyundai experiment trying to manufacture a car capable of meet the most stringent and safety demands to compete in the North American Market through creative imitation and when Hyundai took the risk and experiment in manufacturing the first subcompact car designed on its own through research, respectively.
The interaction with the external environment is evident in all the four phases of the organizational learning process.On the one hand, with the international innovation systems interactions through which Hyundai obtained packaged and unpackaged technology, consultants, professional experts, international literature, etc.More specifically with multinational corporations, universities, research centers, government, etc.On the other hand, Hyundai faced government demands, market demands and technological barriers.
Dialogue and Participative Decision Making are two underlying organizational dimensions that could be appreciated in the internal dynamic of the different taskforces organized with internal and external human resources for the purpose of achieving specific goals along the fourth stages of the organizational learning process.
Organizational values such as commitment to learn, open mind, shared vision and intraorganizational knowledge sharing were present along the four stages of the organizational learning process, otherwise, the achievements show in each stage and specifically the acquisition of innovation capability could not be possible.This is congruent with McDonald (2007) proposition that the goals which an organization aims to achieve and which are shared by all the employees will help new ideas to emerge and be assessed.
Closely related to those underlying organizational dimensions and values pointed out, it is important to underline the Far Sighted and Risk-Taking Leadership and Entrepreneur-Government provision of incentives in the form of protection barriers and promotion plans for strategic industries.Specifically, the strategic industrial plans, coordinated by the government, which design anticipated market, technological and governmental impacts, as well as external factors and conditions such as: protection of the local market from new entrants and from new foreign knock-down imports, a significant tax reduction, promotion of vertical integration leading to new business opportunities, preferential financing, tax concessions and administrative decree to guarantee a large market share for the indigenous Korean car model demanded by the government.There was confluence in all the industrial plans, which were conducted, coordinated and focused to reach the great goal established for the Nation State, to industrialize and develop through the acquisition of technological capability.In addition, the systemic planning efforts involved in this technological learning process can be detected in the congruence and convergence of the industrial, educational as well as science & technology policies issued and coordinated by the government inter alia, the investment in R&D, education and human resource development all directed to support the organizational learning process for catching up at the technological level.Thus, the role played by the Korean government as promoter of the systemic planning, mentioned above, which in the case of Korea was a crucial strategy and part of a more ambitious government goal to orchestrate industrialization.The government was in charge, not only to design, but also to coordinate the industrial, economic, educational, scientific and technological public policies issuing the corresponding programs and mechanisms to support this learning effort by providing scholarships for studies abroad in strategic areas demanded by the technological learning process for catching up.That is the government played a crucial function by creating the conditions and providing the resources to build the educational platform, to provide the training and the scientific research required by the industrialization process and by the society as a whole.In addition, the government was also a great promoter of collaborative and coordinated relations between universities and research institutes with the industrial sector.Furthermore, the government assure the collaboration and coordination that the promotion plans in strategic industries demanded.

III. Analysis of the Korean Organizational Learning Process
Most of the underlying dimensions and organizational values pointed out by the literature, as determinants for and organizational learning process such as experimentation, risk taking, interaction with the external environment, dialogue, participative decision making as well as organizational values such as commitment to learn, open mind, shared vision, intra-organizational knowledge sharing can be identified in The analysis of this process also points out that the pattern followed concentrate all its efforts first in the strength of Production & Engineering capacity, achieved during the first and second stage of the process, when Hyundai complete capabilities in duplicative imitation materialized in the first Korean manufactured car.After that, as a second step, the emphasis was in achieving creative imitation, that is -to achieve some Development, materialized in the produced Korean car that was able to meet the safety conditions demanded to compete in the North American Market.And it was not until the subsequent stage, when Hyundai accomplish capacities for Research & Innovation.That is, the Korean process reverse the sequence in the traditional pattern promoted by national and international innovation systems, institutions, organisms and policy makers in developing countries to promote and achieve innovation: Research-Development-Engineering (R-D-E), which is the pattern adopted in developed countries e historically imposed by the science and technology institutions as conventional pattern to promote and achieve innovation in developing countries.IV.Conclusion: Basis for the Design of a Technological learning process for catching up in developing countries.
As a conclusion, we have strong evidence about the effectiveness of some basic factors for the design of a technological learning process for catching up in developing countries.Without any doubt, the underlying dimensions as well as the organizational values that characterize the learning orientation in the Korean organizational learning process analysed here with the case of Hyundai were crucial and determined the successful process of industrialization in that country.Therefore, all of those factors should be taking into account when thinking in the design of an organizational learning process for catching up in developing countries.But, besides the strong recommendation for inclusion of those organizational dimensions and values in an organizational learning process, this study strongly emphasize the importance of systemic planning and also propose the convenience to reverse the sequence in the traditional pattern Research-Development-Engineering (R-D-E), which is the pattern adopted in developed countries e historically imposed by the science and technology institutions as conventional pattern to promote and achieve innovation in developing countries.This proposal is based on the successful experiences in Korea and other South-East Asian countries, which experiences have been shown here as a result of the analytical-synthetic approach applied to the case of Hyundai.Therefore, instead of focusing financial resources and efforts to achieve Research (R), then develop some prototypes, (D); and produce and engineer them, (E).The proposed path to follow is to strength production and engineering capacities (E) first, then try to creatively imitate some products, (D); so that the capacity for research and innovation (R&I) could be attained over the basis of the mastering of less sophisticated ship that characterize the adoption and accomplishment of this expeditious learning processes undertook by Hyundai, as Kim (1998) reports and Kirk identifies as crucial in the investment ventures implicated in the process (1994).Without any doubt this process implies a great deal of experimentation, risk taking, strong interaction with the external environment as all the process through the four stages was nourished by the interaction with International Innovation Systems.But, also this characteristic has been recognized in other chaebols or Korean Industrial groups such as those in electronics, semiconductors, shipbuilding, and machinery industries, which have followed the same expeditious learning process for catching up, as it has been documented by Kim and Amsdem, among other authors, as cited earlier.
Another very important factor identified by Kim (1998) in this catching up process undertook by Hyundai is the Proactively Constructed Crisis, or Creative Chaos, as the works of Nonaka (1994) and Nonaka and Takeuchi (1995) define it.Kim reports proactively constructed crisis in every phase of this technological learning process.The description demonstrates how in each phase proactively constructed crisis leads to an increase in intensity of effort.Supporting the latter it is mentioned an idiosyncratic feature such as the hard work habit of Koreans, expressed in the 16 hours work a day, seven days per week, as registered by Kim (1997Kim ( , 1998)).That is, this intensity of effort reported was possible because of this Korean habit of hard work, which in turn finds its roots in socio-cultural characteristics, supporting Yim-Teo (2002) affirmation that the socio-cultural factors are involved in organizational change.But in addition, these organizational factors could not be successfully helping in the achievement of the objectives targeted in each stage without the presence of organizational values such as commitment to learn, open mind, shared vision and intraorganizational knowledge sharing.
As a result of the systemic planning identified as a one of the crucial factors of this unique Korean learning process, just pointed out, it is important to register the availability of well-trained Human Resources, as very relevant and indispensable factor.According to the United Nations report, Korea is the only country within the developing category that made a double jump -from low to medium and from medium to high level in terms of the human development index between 1960and 1992(United Nations Development Program, 1994).In addition, the number of scientists and engineers per 10,000 population is the highest among the developing countries and closer to that of developed countries such as France and United Kingdom (Ministry of Science and Technology, 1994).The Korean evidences of human resource development are not easy to match and undoubtedly requires a long-term investment in education, science and technology infrastructure, nutrition, health, housing, and security, among others.capacities.Thus, the proposal is to promote a process mainly going through the mastering of more simple to more sophisticated capabilities, thus, acquiring first, acquisitive capability, operative capability, adaptive capability and innovative capability; capacities which in Kim's conceptual framework were described as the mastering of operative capacity, duplicative imitation, creative imitation and innovation, that is to reverse the pattern R-D-E and follow the pattern E-D-R, which is a model that has demonstrated major suitability and effectiveness for capacity building, and catching up specifically for developing countries which economies are dominantly characterized by small and medium size firms.